The great rainbow unicorn is something very special. Once soldered, the tail, horn and mane shine almost magically in all the colours of the rainbow. The best thing is: with this soldering kit you can easily make a great pin, pendant or necklace even as a beginner. You only have to solder 6 components on the back. For those who already know a bit about soldering: The LEDs are THT, i.e. through-hole components. They are soldered to the surface on the back. We used this trick to avoid having holes on the front. This way, the unicorn can shine in all its glory and shine without any flaws.For all those who are not yet that far: don't worry! Detailed and well-tested instructions will guide you through this little soldering adventure.A video of the rainbow colours can be found here: https://www.youtube.com/watch?v=b8JFJ-eYq9oTarget groupThe electronic soldering kit is designed for beginners. Adults and children alike can have fun with the unicorn soldering kit, although of course you should not let children solder alone. Relatively large components are used, which make it easy to learn how to solder. Only 6 components need to be soldered. This is also possible for absolute beginners in a reasonable amount of time. And the shape? Who isn't a unicorn fan, please? :) It's best to order one or two of these soldering kits, because as you can imagine, the unicorn soldering kit is a popular gift for friends, partners or children.The components in the unicorn soldering kitOur kits always contain all the components you need for soldering. Unfortunately, we cannot send you the batteries. However, you can get them from hardware stores and larger supermarkets (more on this below under "Tools and accessories"). The soldering kit includes:The circuit boardThe circuit board is the heart of the unicorn. It forms the outline and the place to solder all the components. The board is made of fiberglass material which is coated with a gold alloy. A white coating of varnish is applied on top of it. Some parts of the board are slightly transparent. This creates the great effects on the tail and horn! RGB LEDsThis is where the magic happens! RGB stands for red-green-blue and describes the different colours of the LED. It looks like one LED, but there are 3 tiny little LEDs that slowly change through an integrated circuit. This gives you all the colours of the rainbow. Look closely, the black dot you find in the LED is the entire circuit! Yes really, so tiny! Just connect 3V and the LED lights up in all colours. There are four RGB LEDs in the Unicorn soldering kit.The SMD battery holderThe battery holder for CR2032 batteries is included in the kit in an SMD version. It is soldered onto the surface like the other components. How to do this is described in the soldering instructions. The battery itself is then simply plugged in. The battery lasts for 4-8 hours of continuous operation. So you should switch off your unicorn to save some power. You can get more in any well-stocked supermarket, in hardware stores and Swedish furniture stores.A switchOf course, a switch is also included! The switch is easy to operate and therefore ideal for children (and adult hands). The switch locks and stays in the position (on or off) you want the switch to be in. A great perceptible "click" provides haptic and acoustic comfort.Needed toolsHow the minimal soldering workplace looks like is described here: The soldering workplace To make the unicorn glow, you need to get one CR2032 battery per unicorn at the hardware store or a big supermarket/shop. Also, a pair of tweezers is very helpful for this kit :) Instructions and helpTo make it easy for you to solder the kit, we have put together detailed instructions with lots of pictures and individual steps for each of our kits. There you will be guided step by step through the assembly and there are many tips and tricks on how to solder correctly. For the majority of our soldering kits there are also interactive circuits with the names of the components and the tracks. All instructions are available in German and English. For environmental reasons we do not print our instructions. In fact, it is better to view them on screen, as you can then zoom into the high-resolution photos to see details. On each kit you will find a QR code or link to the instructions.You can find all the instructions as PDF files at the following link: https://binary-kitchen.github.io/SolderingTutorialJust click on "DE" or "EN" for the relevant kit and you can download a PDF.CaseGot a 3D printer at home? Print your own unicorn enclosure! The wonderful Christian Erhardt has designed and published an enclosure. You can find the print data here: https://github.com/Binary-Kitchen/rainbow_unicorn/tree/master/caseLovingly packed for you by handAll soldering kits are lovingly packed for you by hand in Germany. Unfortunately, it happens from time to time that a component is packed too much or too little. If something is too much: No problem! Keep the components and use them for your creations! If something is missing: No problem! Just send us an email and we will send you the missing parts.Show us your unicornWe at blinkyparts are super excited to hear what your unicorn soldering kit turned out to be. A pin? A hair clip? Did you tattoo or paint the unicorn? A pin for your backpack or something completely different? Share your photo with us atTwitter/Mastodon: #SolderingConnectsInstagram: #LötenVerbindet or follow us under @blinkyparts_comHelp others with your feedbackIt is often difficult to judge whether a soldering kit is something for oneself. Help others by giving us a rating, a feedback. How did it work? What equipment did you have? What did you like most about it? What is your unicorn doing now? Just leave a review here on the product page under "Reviews".

Launch your own rocket with the MINT-Labs Rocket Soldering Kit! This fun DIY project creates a colorful LED rocket light – perfect as a pin, necklace pendant, or decorative accessory. Once soldered, the rocket’s porthole and exhaust trail light up in all the colors of the rainbow. Easy Soldering – Perfect for Beginners This kit is ideal for beginners: You only need to solder 6 components on the back of the PCB. The included THT LEDs (Through-Hole Technology) are cleverly surface-mounted to keep the front looking neat and clean. There’s just one hole – for attaching a keychain or clipping the rocket onto a bag. No worries if you’ve never soldered before: a detailed, well-tested instruction guide walks you through your little rocket adventure step by step! Video Tip: Check out the rainbow light animation here: Watch on YouTube (It looks even better in real life!) Who Is It For? This rocket soldering kit is designed for electronics beginners – great for kids (with supervision), teens, and adults. The components are intentionally a bit larger, making soldering easier. An ideal gift for tech enthusiasts, birthday parties, or STEM workshops! What’s Inside the Rocket Soldering Kit All electronic components required for soldering are included. The CR2032 battery is not part of the kit due to shipping restrictions – you can easily find one at hardware stores or well-stocked supermarkets. PCB: High-quality printed circuit board with gold-plated traces and translucent areas for stunning light effects 4 RGB LEDs: Color-changing via integrated microelectronics (red-green-blue) – displays the full rainbow spectrum SMD Battery Holder: For one CR2032 coin cell, easy to solder Click-on Slide Switch: Enables easy on/off functionality – satisfying tactile feedback included Tools & Accessories You’ll Need Additional items you'll need: Soldering iron & solder wire Tweezers (recommended) CR2032 coin cell battery (not included) Here are some tips for your minimal soldering workspace. Step-by-Step Online Instructions Every kit includes a digital manual in both German and English. The guides are filled with helpful images and tips. You can find them here: View Instructions (Download PDF) For sustainability reasons, we don’t include printed manuals. It's best to follow along on your phone or tablet. About MINT-Labs MINT-Labs Regensburg e.V. is a non-profit organization promoting STEM education (Science, Technology, Engineering, and Math) for all ages. This kit was developed in close collaboration with them and proudly carries their name. Lovingly Hand-Packed All our kits are lovingly hand-packed in Germany. If a part is ever missing, just drop us a message – we’ll send you a replacement free of charge. And if there’s an extra part? Feel free to keep it for your own creations! Share Your Rocket With Us! What did you create with your rocket kit? Show us! Twitter/Mastodon: #LötenVerbindet Instagram: @blinkyparts_com or use the hashtag #LötenVerbindet Help Others With Your Review How was your rocket soldering experience? Share your thoughts on the product page under “Reviews” – your feedback helps others find the perfect kit!

How cool are axolotls? If you're as big a fan as we are, or want to become one, then this badge is just the thing for you. When you have finished soldering the Axolotl soldering kit, the eyes and gills of your Axolotl will glow in all the colors of the rainbow. The best thing is: with this soldering kit you can easily make a great pin, pendant or necklace even as a beginner. You only have to solder 6 components on the back. For those who already know a bit about soldering: The LEDs are THT, i.e. through-hole components. They are soldered to the surface on the back. We used this trick to avoid having holes on the front. Well, we left one hole to hang the axolotl on a keychain or somewhere else. This way, the axo can shine in all its glory and shine without any flaws.For all those who are not yet that far: don't worry! Detailed and well-tested instructions will guide you through this little soldering adventure.You can find a video of the rainbow colours here: https://youtu.be/xomhgZGvNyQ In the video we show you the front and back of the Axolotl soldering kit. You also get an impression of the animation of the LEDs. In the picture gallery you will also find an animated picture. The animation is normally much slower. The gif is a time-lapse recording.Target groupThe electronic soldering kit is designed for beginners. Adults and children alike can have fun with the unicorn soldering kit, although of course you should not let children solder alone. Relatively large components are used, which make it easy to learn how to solder. Only 6 components need to be soldered. This is also possible for absolute beginners in a reasonable amount of time. And the shape? Axolotl fan club is the best! It's best to order a kit or two at the same time, because as you can imagine, the rocket or unicorn soldering kit is a popular gift for friends, partners or children.The components in the axolotl soldering kitOur kits always contain all the components you need for soldering. Unfortunately, we cannot send you the batteries. However, you can get them from hardware stores and larger supermarkets (more on this below under "Tools and accessories"). The soldering kit includes:The circuit boardThe circuit board is the heart of our axolotl. It forms the outline and the place to solder all the components. The board is made of fiberglass material which is coated with a gold alloy. A white coating of varnish is applied on top of it. Some parts of the board are slightly transparent. This creates the great effects on the exhaust jet and the porthole.RGB LEDsThis is where the magic happens! RGB stands for red-green-blue and describes the different colours of the LED. It looks like one LED, but there are 3 tiny little LEDs that slowly change through an integrated circuit. This gives you all the colours of the rainbow. Look closely, the black dot you find in the LED is the entire circuit! Yes really, so tiny! Just connect 3V and the LED lights up in all colours. There are four RGB LEDs in the Rocket soldering kit.The SMD battery holderThe battery holder for CR2032 batteries is included in the kit in an SMD version. It is soldered onto the surface like the other components. How to do this is described in the soldering instructions. We made sure that the SMD battery holder is very easy to solder on. The battery itself is then simply plugged in. The battery lasts for 4-8 hours of continuous operation. So you should switch off your rocket to save some power. You can get more in any well-stocked supermarket, in hardware stores and Swedish furniture stores.A switchOf course, a switch is also included! The switch is easy to operate and therefore ideal for children (and adult hands). The switch locks and stays in the position (on or off) you want the switch to be in. A great perceptible "click" provides haptic and acoustic comfort.Needed toolsHow the minimal soldering workplace looks like is described here: The soldering workplace To make the MINT-Labs rocket glow, you need to get one CR2032 battery per rocket at the hardware store or a big supermarket/shop. Also, a pair of tweezers is very helpful for this kit :) Instructions and helpTo make it easy for you to solder the kit, we have put together detailed instructions with lots of pictures and individual steps for each of our kits. There you will be guided step by step through the assembly and there are many tips and tricks on how to solder correctly. For the majority of our soldering kits there are also interactive circuits with the names of the components and the tracks. All instructions are available in German and English. For environmental reasons we do not print our instructions. In fact, it is better to view them on screen, as you can then zoom into the high-resolution photos to see details. On each kit you will find a QR code or link to the instructions.You can find all the instructions as PDF files at the following link: https://binary-kitchen.github.io/SolderingTutorialJust click on "DE" or "EN" for the relevant kit and you can download a PDF.Who are the MINT-Labs?The MINT-Labs Regensburg e.V. is an association for the promotion of STEM education among children and adults. The axolotl is a speical badge for the axo fanclub. The axolotl was developed together with them and therefore proudly bears the name of the MINT-Labs. If you're ever in Regensburg, stop by! If you are a hackspace or a MINT organisation: network :)Lovingly packed for you by handAll soldering kits are lovingly packed for you by hand in Germany. Unfortunately, it happens from time to time that a component is packed too much or too little. If something is too much: No problem! Keep the components and use them for your creations! If something is missing: No problem! Just send us an email and we will send you the missing parts.Show us your axolotlWe at blinkyparts are super excited to hear what your axolotl soldering kit turned out to be. A pin? A hairclip? A pendant? Did you paint the MINT-Labs axolotl? A pin for your backpack or something completely different? Share your photo with us atTwitter/Mastodon: #SolderingConnectsInstagram: #LötenVerbindet or follow us under @blinkyparts_comHelp others with your feedbackIt is often difficult to judge whether a soldering kit is something for you. Help others by giving us a rating, a feedback. How did it work? What equipment did you have? What did you like most about it? What makes you the best axolotl fan? Just leave a review here on the product page under "Reviews".

Let this beautiful butterfly fly with its bright colours! Once soldered, its wings shine brightly in all the colours of the rainbow. The bright spots stand out beautifully against its metal decorations. On the left and right of each wing are small eyelets for hanging on a chain and, of course, his filigree antennae must not be missing. Solder a real work of art and embellish yourself and your surroundings with it :).The best thing is: With this soldering kit you can easily make a great pin, pendant or necklace even as a beginner. You only have to solder 6 components on the back. For those who already know a bit about soldering: The LEDs are THT, i.e. through-hole components. They are soldered to the surface on the back. We used this trick to avoid having holes on the front. This way the butterfly can shine in all its glory and without any blemishes. With the soldered eyelets you can easily and safely thread the butterfly onto a chain.For all those who are not yet ready: never mind! Detailed and well-tested instructions will guide you through this little soldering adventure.A video of the rainbow colours can be found here: https://www.youtube.com/watch?v=b8JFJ-eYq9o The video is from our unicorn but you get a nice impression of the smooth colour changes that make your butterfly look wonderful.Target groupThe electronic soldering kit is designed for beginners. Adults and children alike can have fun with the unicorn soldering kit, although of course you should not let children solder alone. Relatively large components are used, which make it easy to learn how to solder. Only 6 components and a few wires need to be soldered. This is also possible for beginners in a reasonable amount of time. And the shape? A fantastically sleek butterfly. This is an eye-catcher for everyone! It's best to order a kit or two at the same time, because as you can imagine, the butterfly and our other rainbow soldering kits are popular gifts for friends, partners or children.The components in the rainbow butterfly soldering kit Our kits always include all the components you need for soldering. Unfortunately we cannot send you the batteries. However, you can get them from DIY stores and larger supermarkets (more on this below under "Tools and accessories"). The soldering kit includes:The circuit boardThe circuit board is the heart of the butterfly kit. It forms the outline and the space to solder all the components. The board is made of fibreglass material which is coated with a silver or gold alloy. On top of this comes a silky matt black lacquer layer. Some parts of the board are slightly transparent. This creates the great effects on the wings!RGB LEDsThis is where the magic happens! RGB stands for red-green-blue and describes the different colours of the LED. It looks like one LED, but there are 3 tiny little LEDs that slowly change through an integrated circuit. This gives you all the colours of the rainbow. Look closely, the black dot you find in the LED is the entire circuit! Yes really, so tiny! Just connect 3V and the LED lights up in all colours. There are four RGB LEDs in the Unicorn soldering kit. The SMD battery holderThe battery holder for CR2032 batteries is included in the kit in an SMD design. It is soldered onto the surface like the other components. How to do this is described in the soldering instructions. The battery itself is then simply plugged in. The battery lasts for 4-8 hours of continuous operation. So you should switch off your butterfly when you don't need it to save some power. You can get a refill in any well-stocked supermarket, in do-it-yourself stores and Swedish furniture stores.A SwitchOf course, a switch is also included! The switch is easy to operate and therefore ideal for children (and adult hands). The switch locks in place and stays in the position (on or off) you want the switch to be in. A great perceptible "click" provides haptic and acoustic comfort.Required toolsHere we describe what the minimum soldering workstation looks like: The soldering workstation To make the butterfly glow, you need to buy one CR2032 battery per butterfly kit at the DIY store or a big supermarket/shop. It's best to buy 1-2 more batteries! A pair of tweezers is also very useful for this kit :). A pair of round-nose pliers will help you bend the wire eyelets and the antennae. But you can also use a normal pair of pliers and a little patience.Instructions and helpTo make it easy for you to solder the kit, we have put together detailed instructions with lots of pictures and individual steps for each of our kits. There you will be guided step by step through the assembly and there are many tips and tricks on how to solder correctly. For most of our soldering kits there are also interactive circuits with the names of the components and the tracks. All instructions are available in German and English.For environmental reasons we do not print our instructions. In fact, it is better to view them on screen, as you can then zoom into the high-resolution photos to see details. On each kit you will find a QR code or link to the instructions.You can find all the instructions as PDF files at the following link: https://binary-kitchen.github.io/SolderingTutorial Just click on "DE" or "EN" for the right kit and you can download a PDF. 3D printed caseMax has built a wonderful case for the butterfly. You can find all the data you need to print it yourself here: https://gitlab.com/M4x__/rainbow-butterfly-snap-fit-caseLovingly packed for you by handAll soldering kits are lovingly packed for you by hand in Germany. Unfortunately, it happens from time to time that a component is packed too much or too little. If something is too much: No problem! Keep the components and use them for your creations! If something is missing: No problem! Just send us an email and we will send you the missing parts.Show us your butterflyWe at blinkyparts are super excited to hear what your butterfly soldering kit turned out to be. A pin? A hair clip? Did you decorate the butterfly's wings with stickers or did you make, tattoo or paint a pendant? A pin for your backpack or something completely different? Share your photo with us at Twitter/Mastodon: #SolderConnects Instagram: #SolderConnects or follow us on @blinkyparts_com.

Excuse me? What are you staring at?This wonderful kit is very simple in terms of circuitry, but the result is simply hilarious. A cat from behind.. And what is that? The as... shines ... in rainbow colours!When you press the button, an RGB LED on the back lights up and makes the observer smile coyly. Now all you have to do is pin it to your jacket and you have the perfect conversation starter.The battery holder, switch and LED are hidden on the back. The only unusual thing about the LED is that it is a THT LED, i.e. a push-through component. It is soldered to the surface on the back, but lying down. We used this trick to avoid having holes on the front side.... Well... Exactly only one hole. So the one hole can shine in all the wonderful colours of the rainbow. All soldering tricks are of course described in the instructions.The kit comes with all the necessary components and PCB:BoardRainbow RGB LEDBattery holder SMD CR2032Switch

A very simple soldering kit with four LEDs. The four LEDs are connected with a few wires to a battery holder. As soon as a battery is inserted, the LEDs light up in all colors of the rainbow. Thanks to the clothespin, you can easily attach the artwork afterwards. No big soldering skills are needed for this kit. It is really ideal even for children and teenagers.The name comes from the unit "Nibble". A nibble is a unit for four bits (half a byte).

The youth hack alpaca Al Hacka is cooler than reality allows! From behind, the eyes are illuminated in all the colours of the rainbow. To make it even cooler, it comes with a pair of sleek black sunglasses.The best thing is: With this soldering kit you can easily make a great pin, pendant or necklace even as a beginner. You only have to solder 4 components on the back. For those who already know a bit about soldering: The LEDs are THT, i.e. through-hole components. They are soldered to the surface on the back. We used this trick to avoid having holes on the front. This way the alpaca can shine in all its glory and without any blemishes.For all those who are not yet ready: never mind! Detailed and well-tested instructions will guide you through this little soldering adventure.You can find a video of the rainbow colours here: https://www.youtube.com/watch?v=b8JFJ-eYq9o(The video is of our unicorn, but it will give you an idea of how great the Al Hacka alpaca glows).Target groupThe electronic soldering kit is designed for beginners. Adults and children alike can have fun with the Alpaka soldering kit, although of course you should not let children solder alone. Relatively large components are used, which make it easy to learn how to solder. Only 4 components need to be soldered on. This is also possible for absolute beginners in a reasonable amount of time. And the shape? Who can resist the coolness of Al Hacka the Soldering Paka? :) It's best to order one or two of the other items as well, because as you can imagine, the alpaca soldering kit is a popular gift for friends, partners or children.The components in the Jugendhackt soldering kitOur kits always contain all the components you need for soldering. Unfortunately, we cannot send you the batteries. However, you can get them from DIY stores and larger supermarkets (more on this below under "Tools and accessories"). The soldering kit includes:The circuit boardThe circuit board is the heart of the alpaca. It forms the outline and the space to solder all the components. The board is made of fibreglass material which is coated with a gold alloy. A layer of white lacquer is applied on top. Some parts of the board are slightly transparent. This creates the great effects of the eyes! The icing on the cake: The sunglasses made of black PCB. The perfect addition for Al Hacka.RGB LEDsThis is where the magic happens! RGB stands for red-green-blue and describes the different colours of the LED. It looks like an LED, but it is 3 tiny little LEDs that slowly alternate through an integrated circuit. This gives you all the colours of the rainbow. Look closely, the black dot you find in the LED is the entire circuit! Yes really, so tiny! Just connect 3V and the LED lights up in all colours. There are two RGB LEDs in the Alpaka soldering kit.The SMD battery holderThe battery holder for CR2032 batteries is included in the kit in an SMD construction. It is soldered onto the surface like the other components. How to do this is described in the soldering instructions. The battery itself is then simply plugged in. The battery lasts for 4-8 hours of continuous operation. So you should switch off your alpaca to save some power. You can get a new one in any well-stocked supermarket, in do-it-yourself stores and Swedish furniture stores.A switchOf course, a switch is also included! The switch is easy to operate and therefore ideal for children (and adult hands). The switch locks and stays in the position (on or off) you want the switch to be in. A great perceptible "click" provides haptic and acoustic comfort.Required toolsHere we describe what the minimum soldering workstation looks like: Der LötarbeitsplatzIn order to light up the Alpaka soldering kit, you need to buy one CR2032 battery per Alpaka at a DIY store or a large supermarket/Swedish furniture store.Also, tweezers are especially helpful for this kit :) Instructions and helpTo make it easy for you to solder the kit, we have put together detailed instructions with lots of pictures and individual steps for each of our kits. There you will be guided step by step through the assembly and there are many tips and tricks on how to solder correctly. For the majority of our soldering kits there are also interactive circuits with the names of the components and the tracks. All instructions are available in German and English.For environmental reasons we do not print our instructions. In fact, it is better to view them on screen, as you can then zoom into the high-resolution photos to see details. On each kit you will find a QR code or link to the instructions.You can find all the instructions as PDF files at the following link: https://binary-kitchen.github.io/SolderingTutorialJust click on "DE" or "EN" for the right kit and you can download a PDF.3D printed case Axel from Hacklabor Schwerin has built a wonderful case for the Al Hacka Alpaka. You can find all the necessary data here: https://gitlab.com/hacklabor/jugendhackt-al-hacka-alpaka-caseLovingly packed for you by handAll soldering kits are lovingly packed for you by hand in Germany. Unfortunately, it happens from time to time that a component is packed too much or too little. If something is too much: No problem! Keep the components and use them for your creations! If something is missing: No problem! Just send us an email and we will send you the missing parts.Show us your alpacaWe at blinkyparts are super excited to hear what your Al Hacka soldering kit turned out to be. A pin? A hairclip? Did you paint or tattoo the alpaca? A pin for your backpack or something completely different? Share your photo with us atTwitter/Mastodon: #SolderingConnectsInstagram: #SolderingConnects or follow us on @blinkyparts_comHelp others with your feedbackIt is often difficult to judge whether a soldering kit is something for you. Help others by giving us a rating, a feedback. How did it work? What equipment did you have? What did you like most about it? What is your alpaca doing now? Just leave a review here on the product page under "Reviews".

From a time long gone, this friendly dino greets us with his rainbow scales on his back. kunkelkunst, Taxxizz and x70b1 (yes, those are all their nicknames) have designed and created this great soldering kit. There are four LEDs on the back that make the scales glow in all the colours of the rainbow. The best thing is: with this soldering kit you can easily make a great pin, pendant or necklace even as a beginner. You only have to solder 6 components on the back. For those who already know a bit about soldering: The LEDs are THT, i.e. through-hole components. They are soldered to the surface on the back. We used this trick to avoid having holes on the front. Well, we left one hole to hang the dinosaur on a keychain or somewhere else. This way, the RGB dino can shine in all its glory and shine without any flaws.For all those who are not yet that far: don't worry! Detailed and well-tested instructions will guide you through this little soldering adventure.A video of the rainbow colours can be found here: https://www.youtube.com/watch?v=b8JFJ-eYq9o Of course, it looks much better in real life :). The animation here in the pictures is a time-lapse recording. In the video you'll see another soldering kit, but the dino is at least so colourfull as the other soldering kit!Target groupThe electronic soldering kit is designed for beginners. Adults and children alike can have fun with the dinosaur soldering kit, although of course you should not let children solder alone. Relatively large components are used, which make it easy to learn how to solder. Only 6 components need to be soldered. This is also possible for absolute beginners in a reasonable amount of time. And the shape? Who does not like dinosaurs? It's best to order a kit or two at the same time, because as you can imagine, the dino, rocket or unicorn soldering kit is a popular gift for friends, partners or children.The components in the dino soldering kitOur kits always contain all the components you need for soldering. Unfortunately, we cannot send you the batteries. However, you can get them from hardware stores and larger supermarkets (more on this below under "Tools and accessories"). The soldering kit includes:The circuit boardThe circuit board is the heart or the body of the dinosaur. It forms the outline and the place to solder all the components. The board is made of fiberglass material which is coated with a gold alloy. A white coating of varnish is applied on top of it. Some parts of the board are slightly transparent. This creates the great effects on the back scales of the dino.RGB LEDsThis is where the magic happens! RGB stands for red-green-blue and describes the different colours of the LED. It looks like one LED, but there are 3 tiny little LEDs that slowly change through an integrated circuit. This gives you all the colours of the rainbow. Look closely, the black dot you find in the LED is the entire circuit! Yes really, so tiny! Just connect 3V and the LED lights up in all colours. There are four RGB LEDs in the Rocket soldering kit.The SMD battery holderThe battery holder for CR2032 batteries is included in the kit in an SMD version. It is soldered onto the surface like the other components. How to do this is described in the soldering instructions. We made sure that the SMD battery holder is very easy to solder on. The battery itself is then simply plugged in. The battery lasts for 4-8 hours of continuous operation. So you should switch off your dino to save some power. You can get more in any well-stocked supermarket, in hardware stores and Swedish furniture stores.A switchOf course, a switch is also included! The switch is easy to operate and therefore ideal for children (and adult hands). The switch locks and stays in the position (on or off) you want the switch to be in. A great perceptible "click" provides haptic and acoustic comfort.Needed toolsHow the minimal soldering workplace looks like is described here: The soldering workplace To make the dinosaur soldering kit glow, you need to get one CR2032 battery per rocket at the hardware store or a big supermarket/shop. Also, a pair of tweezers is very helpful for this kit :) Instructions and helpTo make it easy for you to solder the kit, we have put together detailed instructions with lots of pictures and individual steps for each of our kits. There you will be guided step by step through the assembly and there are many tips and tricks on how to solder correctly. For the majority of our soldering kits there are also interactive circuits with the names of the components and the tracks. All instructions are available in German and English. For environmental reasons we do not print our instructions. In fact, it is better to view them on screen, as you can then zoom into the high-resolution photos to see details. On each kit you will find a QR code or link to the instructions.You can find all the instructions as PDF files at the following link: https://binary-kitchen.github.io/SolderingTutorialJust click on "DE" or "EN" for the relevant kit and you can download a PDF.Lovingly packed for you by handAll soldering kits are lovingly packed for you by hand in Germany. Unfortunately, it happens from time to time that a component is packed too much or too little. If something is too much: No problem! Keep the components and use them for your creations! If something is missing: No problem! Just send us an email and we will send you the missing parts.Show us your dinoWe at blinkyparts are super excited to hear what your dino soldering kit turned out to be. A pin? A hairclip? A pendant? A pin for your backpack or something completely different? Share your photo with us atTwitter/Mastodon: #SolderingConnectsInstagram: #LötenVerbindet or follow us under @blinkyparts_comHelp others with your feedbackIt is often difficult to judge whether a soldering kit is something for you. Help others by giving us a rating, a feedback. How did it work? What equipment did you have? What did you like most about it? What makes your dinosaur special? Just leave a review here on the product page under "Reviews".

Some transistors that generate a sawtooth signal. By connecting different resistors the frequency and the pitch of the organ changes. Finished is a great soldering kit to perform music by yourself. Ideal for beginners!On the frontside you will find a keyboard and a stylus in the shape of a soldering iron that can be broken off. If you put the tip of the stylus on a key, the circuit is closed and a sound is generated. on the back is a speaker and the on-off switch. 

This is Katie - The cat! Katie is a cat with two eye colours! Look deep into her eyes and you will see her beautiful two-coloured eyes. Heterochromatic eyes! Katie is a black cat who likes to live in boxes. Katie is a wonderful and easy soldering kit for anyone who wants to learn to solder or wants a great cat for company. What's special about Katie the Cat. Katie was designed by Franziska Breunig herself when she was 11 years old. From the circuit design to the board! How cool is that?The best thing is: with this soldering kit you can easily make a great pin, pendant or necklace even as a beginner. You only have to solder 6 components on the back. For those who already know a bit about soldering: The LEDs are THT, i.e. through-hole components. They are soldered to the surface on the back. We used this trick to get the special effect of the eyes.For those who are not yet ready: never mind! Detailed and well-tested instructions will guide you through this little soldering adventure.Target groupThe electronic soldering kit is designed for beginners. Franziska has also written the instructions and we have taken special care to use simple language. Adults and children alike can have fun with the cat soldering kit, although of course you should not let children solder alone. Relatively large components are used, making it easy to learn how to solder. Only 6 components need to be soldered. This can be done in a reasonable amount of time even by absolute beginners. The shape shows the cat Katie with her two different eyes looking at you playfully. It's best to order one or two other kits at the same time, because as you can imagine, Katie loves company and the other soldering kits make a great gift for friends and family.The components in the Katie the Cat kitOur kits always include all the components you need for soldering. Unfortunately, we cannot send you the batteries. However, you can get them from hardware stores and larger supermarkets (more on this below under "Tools and accessories"). The soldering kit includes:The Board (PCB)The circuit board is the heart and gives Katie her beautiful shape. It forms the outline and the space to solder all the components. The board is made of fibreglass material which is coated with a gold alloy. A layer of black lacquer is applied on top. There are two holes in the board, which allow the LEDs to shine from the back.The LEDsThis is where the magic happens! And they do it twice. Once in green and once in blue they make the eyes shine, both the eyes that solder the kit and the eyes of the cat. The colour was chosen especially for you by Franziska. The brightness is also perfectly matched!The SMD battery holderThe battery holder for CR2032 batteries is included in the kit in an SMD design. It is soldered onto the surface like the other components. How to do this is described in the soldering instructions. We made sure that the SMD battery holder is very easy to solder on. The battery itself is then simply plugged in. The battery lasts for many hours of continuous operation. If you don't want Katie to be there for you with shining eyes, you can switch her off with a switch. You can buy more batteries in any well-stocked supermarket, in hardware stores and Swedish furniture stores. It's best to buy 1-2 more batteries ;).A Push ButtonOf course, a switch is also included! The button is easy to operate and therefore ideal for children (and adult hands). The switch locks and remains in the position (on or off) in which you want the switch to be. A great perceptible "click" ensures haptic and acoustic well-being.Required ToolsHere we describe what the minimum soldering workstation looks like: The soldering workplaceTo make Katie's eyes light up, you'll need to get another CR2032 battery per soldering kit at the hardware store or a large supermarket/Swedish home furnishing store.Also, tweezers are particularly helpful for this kit :) Instructions and HelpTo make it easy for you to solder the kit, we have set up detailed instructions with lots of pictures and individual steps for each of our kits. There you will be guided step by step through the assembly and there are many tips and tricks on how to solder correctly. For the majority of our soldering kits there are also interactive circuits with the names of the components and the tracks. All instructions are available in German and English.For environmental reasons, we do not print our instructions. It is even better to view them on screen, as you can then zoom into the high-resolution photos to see the details. On each kit you will find a QR code or link to the instructions.You can find all the instructions in PDF format under the following link: https://binary-kitchen.github.io/SolderingTutorialJust click on "DE" or "EN" for the right model kit and you can download a PDF.Lovingly packed for you by handAll soldering kits are lovingly packed for you by hand in Germany. Unfortunately, it happens from time to time that a component is packed too much or too little. If something is too much: No problem! Keep the components and use them for your creations! If something is missing: No problem! Just send us an email and we will send you the missing parts.Show us what you did with your KatieWe at blinkyparts are super excited to find out what happened to your Katie the Cat soldering kit. A pin? A hair clip? A pendant? Did you engrave or paint Katie? A pin for your backpack or something completely different? Share your photo with us atTwitter/Mastodon: #SolderingConnectsInstagram: #SolderingConnects or follow uns at @blinkyparts_comHelp others with your feedbackIt is often difficult to judge whether the soldering kit is something for you. Help others by giving us a rating, a feedback. How did it work? What equipment did you have? What did you like most about it? What makes your cat special? Just leave a review here on the product page under "Reviews".

The cat in the box is a simple SMD soldering kit for collecting and trading. On the back is a simple circuit with CR2032 battery holder, on-off switch and a resistor. The front shows the cat in the box with two glowing LED eyes.The special thing about this kit: You can choose the eye colour yourself :). Red, pink, green, orange? It doesn't matter. Let the cat eyes glow in your favourite colour.We will send you all the LED colours. You can then decide for yourself which eyes you would like to have. The following colours are included:redorangepinkgreenFor this kit you only need to solder 3 SMD components (0805) and a few larger components. So don't be put off by SMD. The eye effect is worth it :).The kit includes all necessary components and the PCB:Board2 0805 SMD LEDs (for the eyes)Battery holder SMD CR2032SwitchResistor 0805

The OwlThief is an eye-catching DIY soldering kit shaped like an owl, featuring glowing orange LED eyes. Based on a Joule Thief circuit, it draws power even from "dead" batteries, making it a fun and educational electronics project. Key Features Runs on nearly empty AA batteries Orange LEDs shine through translucent eyes Supports both THT and SMD components (THT version included) Self-standing thanks to bottom-mounted battery holder Includes on/off switch for easy control What's in the Kit? High-quality gold-and-black fiberglass PCB (owl design) Pre-cut wire and ferrite core for custom coil Resistor, capacitor, Zener diode, and BC547 transistor 2 orange LEDs AA battery holder (battery not included) Toggle switch Important Notes ⚠️ Do not use rechargeable batteries (NiMH/Li-ion)! The circuit fully drains the battery, which can damage rechargeable cells. 🛠️ Ideal for beginners – only 9 components to solder. 💡 Interactive and illustrated instructions available in English and German. What is a Joule Thief? A Joule Thief is a simple circuit that boosts low voltages to power devices like LEDs. It "steals" the last bits of energy from nearly empty batteries by converting the low voltage to a higher one. The OwlThief uses a hand-wound coil, a transistor, and a few passive components to make this possible. Perfect as a Gift Whether for a sibling, friend, or yourself, the OwlThief is a charming piece of interactive tech art that looks great on a desk or nightstand. It’s more than a project – it’s a conversation piece. Documentation & Support Detailed assembly guides with high-resolution images are available online. All kits are lovingly hand-packed in Germany. If you're missing a part, just contact us – we’ll help! 📄 Instructions: Soldering Guide (PDF) Share Your Build Show us your owl! Use #LötenVerbindet on Instagram or Mastodon, or tag us at @blinkyparts_com.

With this great 3D kit you can solder your very own daisy. The best thing about it: There is a super large RGB LED in the middle of the flower. Unlike our unicorns and rockets, you can set the colour yourself. The intensity of the colours red, blue and green can be adjusted with three large variable resistors, so-called potentiometers. Depending on the mixture, you can create your own personal favourite colour.Another potentiometer on the back can be used to adjust the overall brightness. In addition, you can switch off the individual colours to 100% via slide switches and, for example, mix only two colours.Another potentiometer on the back can be used to adjust the overall brightness. In addition, you can switch off the individual colours to 100% via slide switches and, for example, mix only two colours.For all those who are not yet that advanced: never mind! Detailed and well-tested instructions will guide you through this little soldering adventure.Target GroupThe electronic soldering kit is designed for beginners. Adults and children alike can have fun with the Daisy soldering kit, although of course you should not let children solder alone. Relatively large components are used which make it easy to learn how to solder. This is also possible for absolute beginners in a reasonable amount of time. And the shape? Who is not a fan of flowers? :) It's best to order one or two of these at the same time, because as you can imagine, the flower soldering kit is a popular gift for friends, partners or children.The Components in the Daisy Soldering kitIn our kits you will always find all the components you need for soldering. Unfortunately we cannot send you the batteries. However, you can get them from DIY stores and larger supermarkets (more on this below under "Tools and accessories"). The soldering kit includes:The Circuit BoardsThe circuit boards are the heart of the kit. They form the outline and the space to solder all the components. The circuit board is made of fibreglass material which is coated with a gold alloy. A multi-coloured lacquer layer is applied on top. The special thing about the daisy: The circuit boards are arranged in such a way that a 3D flower is created.RGB LEDThis is where the magic happens! RGB stands for red-green-blue and describes the different colours of the LED. It looks like an LED, but there are 3 tiny little LEDs that can change colour through the circuitry on the main board. This gives you all the colours of the rainbow.The Battery HolderThe battery holder for 3xAA or Mignon batteries is included in the kit. It is soldered to the main board like the other components. How to do this is described in the soldering instructions. The battery itself is then simply plugged in. The batteries last a relatively long time. Use rechargeable batteries and you can recharge them at any time. The batteries are located under the main board, so your daisy soldering kit has a great solid base.A Push Switch and Several Slide SwitchesOf course there are also a few switches included! The push switch is easy to operate and therefore ideal for children (and adult hands). The switch locks in place and stays in the position (on or off) you want the switch to be in. A great perceptible "click" provides haptic and acoustic comfort. The three slide switches at the potentiometers activate or deactivate the respective colour.PotentiometerThere are also various adjustable resistors on the circuit board. These change the circuit and provide different bright colours. This way, all the rainbow colours come together. There are also three fixed resistors as series resistors to prevent your circuit from breaking.Tools neededWhat the minimum soldering workstation looks like is described here: Der LötarbeitsplatzTo make the flower light up, you need to get some batteries from a DIY store or a large supermarket/shop. Also, an electric side cutter is very helpful for this kit :) Instructions and HelpTo make it easy for you to solder the kit, we have put together detailed instructions with lots of pictures and individual steps for each of our kits. There you will be guided step by step through the assembly and there are many tips and tricks on how to solder correctly. For the majority of our soldering kits there are also interactive circuits with the names of the components and the tracks. All instructions are available in German and English.For environmental reasons we do not print our instructions. In fact, it is better to view them on screen, as you can then zoom into the high-resolution photos to see details. On each kit you will find a QR code or link to the instructions.You can find all the instructions as PDF files at the following link: https://binary-kitchen.github.io/SolderingTutorialJust click on "DE" or "EN" for the right kit and you can download a PDF.Lovingly Packed for You by HandAll soldering kits are lovingly packed for you by hand in Germany. Unfortunately, it happens from time to time that a component is packed too much or too little. If something is too much: No problem! Keep the components and use them for your creations! If something is missing: No problem! Just send us an email and we will send you the missing parts.Show us your FlowerWe at blinkyparts are super excited to hear what your daisy soldering kit turned out to be. A pin? A hair clip? Did you paint your flower? Share your photo with us onTwitter/Mastodon: #LötenVerbindetInstagram: #SolderingConnects oder follow us at @blinkyparts_comHelp Others with your FeedbackIt is often difficult to judge whether a soldering kit is something for you. Help others by giving us a rating, a feedback. How did it work? What equipment did you have? What did you like most about it? How is your flower doing now? Just leave a review here on the product page under "Reviews".

The best thing is: With this soldering kit, even beginners can easily make a great pin, pendant or necklace. Only 4 components need to be soldered on the back. For those who already know their way around: The LEDs are THT, i.e. through-hole components. The Robo Robin has particularly striking eyes that light up in all colours and cast a spell over everyone. For all those who are not yet ready: don't worry! Detailed and tried and tested instructions will guide you through this little soldering adventure. The kit comes with all the necessary components and PCB : Board 2 rainbow RGB LEDs THT CR2032 battery holder SwitchTools required We describe what the minimum soldering workstation looks like here: The soldering workstation To light up the Robo Robin, you will need to buy one CR2032 battery per Robo Robin from a DIY store or a large supermarket/Swedish furniture store.Instructions and help To make it easy for you to solder the kit, we have put together detailed instructions with lots of pictures and individual steps for each of our kits. There you will be guided step by step through the assembly and there are many tips and tricks on how to solder correctly. For the majority of our soldering kits there are also interactive circuits with the names of the components and the conductor paths. All instructions are available in German and English.For environmental reasons, we do not print our instructions. It is even better to view them on screen, as you can then zoom into the high-resolution photos to see the details. On each kit you will find a QR code or link to the instructions. You can find all instructions as PDF files under the following link: https://binary-kitchen.github.io/SolderingTutorial Simply click on "DE" or "EN" for the correct kit and you can download a PDF.Show us your Robo Robin We at blinkyparts are super excited to find out what has become of your Robo Robin soldering kit. A pin? A hair clip? Have you added something to your robot, embellished it further? A badge for your rucksack or something completely different? Share your photo with us at Twitter/Mastodon: #LötenVerbindet Instagram: #LötenVerbindet or follow us on @blinkyparts_comHelp others with your feedback It is often difficult to judge whether the soldering kit is something for you. Help others by giving us a rating, a feedback. How did it work out? What equipment did you have? What did you particularly like? What is your Robo Robin doing now? Simply leave a review here on the product page under "Reviews".

LED Cube – A Colorful 3D Cube with 27 RGB LEDs The LED Cube is a vibrant soldering kit featuring 27 RGB LEDs arranged in a 3x3x3 cube structure. The LEDs light up automatically in changing rainbow colors – no programming required! Thanks to a clever template and our step-by-step guide, assembly is straightforward and suitable for beginners. Once the cube is soldered, it is placed into a beautifully crafted wooden box that acts as both a stand and a battery compartment. Kit Highlights: 27 colorful RGB LEDs for fascinating light effects Powered by 2x AA batteries (not included) No programming or flashing needed – just solder and enjoy Sturdy wooden enclosure doubles as a base and power supply box Perfect for your desk, living room, or as a creative gift Included in the Kit: 27x RGB LEDs (5 mm) 1x Step-up module (0.8 – 3.3 V input to 3.3 V output) 1x Toggle switch 1x AA battery holder 1x Flexible wire 1x Solid-core wire 7x Wooden box elements 2x AA batteries required (not included) How It Works: Once assembled, the cube automatically lights up in various vibrant colors. The RGB LEDs continuously shift in a mesmerizing pattern – all without any microcontroller or programming! Watch the LED Cube in Action: Conclusion: The LED Cube is an eye-catching yet easy-to-build soldering kit that’s perfect for electronics enthusiasts and creative minds alike. Show off your soldering skills with this fun and functional light sculpture!

A beautifully simple kit. This kit is specially designed for soldering beginners. With it you can learn very easily how to use the soldering iron. On the front of the medal-shaped board is the logo of the Binary Kitchen e.V. (a chef's hat with a crossed screwdriver and soldering iron) and the inscription "I can solder". Three rainbow LEDs illuminate the board. There is also a battery holder and a pin on the back.After you have finished soldering the kit, you can proudly pin the medal to your chest!For the kit, THT components were used, i.e. components to be inserted and soldered. Only 9 soldering points have to be done and the kit is ready. Simply fast and almost always a success!Of course, we have for the kit a meaningful step-by-step instructions!The kit comes with all the necessary components and PCB:Board3 rainbow RGB LEDsBattery holder THT CR2032

Hellooo? Ever heard of privacy? This wonderful kit is very simple in terms of circuitry, but the result is simply hilarious. A cat in a box and whoever watches is stared at. The eyes glow in wonderful rainbow colours. If you press the button, two RGB LEDs on the back light up and make the observer smile bashfully. Now all you have to do is pin it to your jacket and you have the perfect conversation starter. The battery holder, switch and LEDs are hidden on the back. The only unusual thing is that the LED is a THT LED, i.e. a through-hole component. It is soldered to the surface on the back, but lying down. We used this trick to avoid having holes on the front. So the one hole can shine in all the wonderful colours of the rainbow. All soldering tricks are of course described in the instructions. Note: The gif in the picture gallery is taken with Fast-Forward. Actually the LEDs are much smoother and slower. The kit comes with all needed parts and PCB: PCB Rainbow RGB LEDs Battery holder SMD CR2032 Switch

Humo – Your Personal Solder Fume Extractor Humo is your friendly companion for clean soldering: a compact, DIY solder fume extractor with a charming look and powerful function. Its large googly eyes add fun to your workspace while the built-in charcoal filter and 12V LED strip ensure clear air and perfect lighting for precise soldering. The kit is great for makers, hackerspaces, classrooms, and anyone who regularly solders. Minimal soldering and some glue are required for assembly. Powered via USB-C using a step-up converter, it transforms 5V into 12V to run both fan and lighting efficiently. Features: Powerful 120mm fan with activated carbon filter Bright 12V LED strip for well-lit solder joints USB-C Power Delivery support Laser-cut wooden enclosure Fully open-source – files available on GitHub Kit contents (Version 2.3): Laser-cut wooden parts (3mm) 120mm SUNON fan Activated carbon filter USB-C to 12V trigger board 10cm 12V warm white LED strip On/off switch Assembly screws GitHub Repository: https://github.com/blinkyparts/humo Assembly guide: See the wikiBy the way: “Humo” means “smoke” in Spanish – the perfect name for your new solder fume extractor!

Have you ever seen a weevil? We would like to celebrate this great beetle with this very simple soldering kit. The kit is a very easy kit with push-through parts, which is explicitly aimed at beginners. It has only a few parts, so even small children can easily assemble it. Once assembled, the red LED “eyes” light up brighter or dimmer depending on how much light falls on the photo sensor. The cool thing about this kit is. The beetle is available in many different colors. You get a colorful mix from us and we always try to mix things up if you order more than one. So you can solder a whole army of beetles :). PartsThis is a very lightweight kit with push-fit components. Simple components are used that can withstand a lot of heat and are relatively quick and easy to solder. 1x battery holder for CR2032 2x LED 5mm red 2x 220 Ohm resistor 1x 47k Ohm resistor 1x photo resistor 1x transistor 1x circuit board More information As always, you can find more information in our Wiki at: https://wiki.blinkyparts.com/de/Baus%C3%A4tze/weevl-eye-ruesselkaefer-bausatzThis great kit was created by Jordan McConnel and published under CC-BY-SA 3.0 license. We love open source and hope you have as much fun with this kit as we do :).

This soldering kit is particularly heavy because very small parts are used. With the Nibble++ your SMD hand soldering skills can be tested extensively. On the board you first start on the rear side to create the running light circuit. Here everything is still simple with 0805 components (2mm x 1,5mm). On the front side you continue with LEDs and resistors with 0805 SMD parts, 0603 (1,6mm x 0,8mm) LED and resistor, 0402 (1mm x 0,5mm) and 0201 (0,6mm x 0,3mm) LED and resistor. If you made it this far, you can pat yourself on the back, but there's more: The supreme discipline 01005-SMD component size (0.4mm x 0.2mm) - Yes really!No matter how good you are, the circuit will light up from the first LED! Don't worry if you can't manage individual component sizes.For the kit you need a lot of patience but afterwards you will be super proud!

This kit is a simple dice to play with.The 7 LEDs a randomized number between 1 and 6 after pressing the button. The randomness is made possible by a great analog circuit.The kit is ideal for beginners and advanced players, because no programming is necessary and many different components must be installed. Through a more extensive kit, many soldering skills can be learned playfully.

With this kit you can easily learn the right SMD soldering, as this kit has many different SMD components.The running light is achieved by a circuit of a clockgenerator NE555 (U1) and two shift registers TI4017 (U2, U3). The NE555 uses the clock signal to shift one bit through both shift registers. At the end the circuit is reset and the cycle starts anew. The outputs of U2 controls the 20 LEDs (D1-D20). Since the TI4017 only has 10 outputs, one output controls two LEDs. U3 controls one transistor each (Q1, Q2) using two outputs, which alternately pull D1-D10 or D11-D20 to GND. This process repeats itself.The kit comes with all the necessary components and PCB:BoardSwitchResistors and LEDsClock NE555, shift registers, transistors etc.Battery holder

We have the pleasure of being able to sell the beautiful Space Girl in Europe, which was created and developed by Steph Piper of makerqueen.com.au in Australia. What makes this kit special is that it was specifically produced to be able to use two colored solder masks, which gives it a very unique look.The Maker Queen kit contains all the essential standard components needed to learn soldering and uses simpler through-hole (THT) components. It comes with a short and simple building guide in English, so you can start right away!The kit comes with all needed parts and PCB: PCB LEDs Battery holder SMD CR2032 SwitchPin and screw to secure the battery

This great LED wolf is a good way to start tinkering if you don't have a soldering iron with you at the moment. All you need is a little glue and a small Phillips screwdriver to assemble this great wolf. Then the wolf lights up with its great yellow eyes! The CR2032 battery is securely screwed together with a bar. Components This is a very lightweight kit with push-fit components. A small side cutter is handy for shortening the legs of the LED 2x wooden parts 3mm 1x wooden part 1.6mm 1x mini wooden part 2x eye rings 2x LED 3mm yellow/orange 2x wood screws (M1.4x5mm)More informationAs always, you can find more information in our Wiki at: https://wiki.blinkyparts.com/de/Baus%C3%A4tze/LED-wolf This great kit was published by Jonathan Günz (harmoniemand) under CC0 1.0. The files were published on Thingiverse. We have only adapted the files to the European market (RoHS, CE, WEEE and address of the distributor). We have also added a small bar so that the battery holds better. Otherwise we have left the files in their original form.