3D Prints

Sturdy Case Kit for the Pinecil – Robust, Well Thought-Out & Perfectly Organized 🆕 Update: Now made from PETG! You spoke, we listened: many of you asked for an even tougher case. That's why we now print it from PETG instead of PLA. The result: noticeably more heat-resistant and more durable, ideal for everyday use at the soldering bench and on the go. Due to the new material, the colors have changed slightly. Check out the updated product photos to see what the case looks like now. Looking for a practical and robust storage solution for your Pinecil soldering iron and accessories? Then this 3D-printed case kit is exactly what you need. Perfect for home, travel or maker events! ✔️ Clever Interior The case holds: 1x Pinecil soldering iron 1x USB-C cable 2x soldering tips (longer variants fit too) 1x brass cleaning sponge 1x integrated soldering iron stand 4x spools for solder or wire Highlight: The soldering iron stand, the solder spools and the sponge cover are held in place by magnets – for extra tidiness and that satisfying snap while you solder. 💪 Printed from PETG PETG is tougher than PLA: it withstands much higher temperatures before deforming and handles impacts and stress better. Your case keeps its shape even when it sits next to a hot soldering iron or travels in your backpack. Outer shell: PETG [color] Inner parts: PETG [color] Soldering iron stand: heat-resistant ABS+ (black) 📦 What's Included (kit without electronics) 2x outer parts ([color], PETG) 2x inner parts ([color], PETG) 1x brass wool + 1x cover 2x clips (latches) 1x ball bearing 1x soldering iron stand (ABS+) 4x spool parts 1x M3x16 screw, 6x M3x20 screws, 1x M3 nut 13x neodymium magnets (various sizes) Note: The kit comes without Pinecil, solder, cable or soldering tips. These are optional and not included. 🔧 Easy Assembly All you need is an Allen key. Thanks to the well thought-out design, assembly takes just a few minutes. Ideal for makers and everyone who wants to become one! 📄 License and Design Sources Based on open-source designs by PjotrStrog, Termiman and Whity (Printables). Used with explicit permission under CC BY-NC-SA 4.0. 🔗 Go to the Wiki Article Of course, we've also put together a wiki article with more information for you: Sturdy Case Kit for the Pinecil – Everything Neat and Perfectly Packed

The Space Egg is a fascinating soldering kit that uniquely combines technology and design! This glowing Easter egg features a clever switch mechanism: Simply turning the egg activates a magnetic switch (reed contact), which lights up the three RGB LEDs. The rainbow colors illuminate both the egg and the flame effect under the rocket-shaped egg cup. 🚀 Key Features: ✅ Perfect for beginners – easy soldering kit with few components ✅ Unique mechanism – light control by turning the egg ✅ Glowing RGB LEDs – create a magical color effect ✅ Great Easter gift – creative, educational, and decorative ✅ Sustainably made – from recycled PLA 🛠️ Kit Contents: ✔️ 3x RGB LEDs (5 mm) ✔️ 1x LED spacer ✔️ 1x Egg (two parts) ✔️ 1x Rocket egg cup (3D-printed, optional) ✔️ 1x Flame effect (3D-printed, optional) ✔️ 1x Reed switch (magnetic switch) ✔️ 1x CR2032 battery holder ✔️ 1x CR2032 battery (not included) ✔️ 1x 8x2 mm neodymium magnet ✔️ 1x Space Eggs PCB 🔧 Additional Tools Needed: ✂️ Super glue or hot glue for assembly 🛠️ 5 mm drill bit for precise adjustments 🌍 Eco-Friendly & Sustainable The 3D-printed parts of the Space Egg are made from recycled PLA – a plant-based plastic that is compostable under industrial conditions. Experience technology while minimizing plastic waste! 💡 Tip: The Space Egg is not only a fun DIY project but also a great night light or Easter decoration!You can find more information and the 3D printing files in our Wiki. It also includes a detailed assembly guide and useful tips for building your Space Egg! 🔋 Please note: The CR2032 battery is not included and must be purchased separately.

This Snapfit Case is the perfect addition to the Rainbow Unicorn Soldering Kit! It provides a stylish way to display your unicorn while enhancing its glow. Product Details Custom-Fit Enclosure: Designed specifically for the Rainbow Unicorn Soldering Kit (sold separately). Convenient On/Off Button: The two-piece design includes the main case and a button for easy power control of the unicorn. Optimized Light Diffusion: Made from recycled, milky-transparent PLA, ensuring a soft and even light distribution. Versatile Usage: Features a built-in loop, allowing it to be worn as a pendant on a necklace or attached to a keychain. Sustainable Material The case is 3D-printed using eco-friendly, recycled PLA. This material is highly durable and helps reduce plastic waste. Important Note The Snapfit Case is sold without the Rainbow Unicorn Soldering Kit! The kit must be purchased separately. Acknowledgment Stefan Daschek adapted the fantastic design by Christian Erhard, creating this Snapfit variant. You can find the files for 3D printing in our Wiki: https://wiki.blinkyparts.com/de/Bausaetze/Einhorn

Keep your batteries organized with the Beer Crate Battery Holder – a unique, stackable mini beer crate for various battery types! This clever and eco-friendly storage solution is 3D-printed from recycled PLA, ensuring your batteries are safely stored and always within reach.✨ Available Variants:✅ AA Version – Holds 12 batteries✅ AAA Version – Holds 20 batteries✅ 9V Version – Holds 5 batteriesScope of deliveryThe choice is yours! You can choose between AAA, AA and 9V block and between different colors:  Black (glitter, sparkling night) Green (Fresh meadow) Purple (Fleeting Violet) Orange (Mild sea buckthorn Or we can choose a color, which is also a little cheaper. You will receive one box each. If you select “Each type once”, you will receive one box each for AAA, AA and 9V batteries, i.e. a total of three boxes.🔄 Stackable & PracticalThanks to its smart design, these crates can be easily stacked, allowing you to store even larger quantities of batteries in an organized way.🛠 Easy AssemblyFor final assembly, simply use a small amount of plastic glue or super glue to securely attach the bottom part to the beer crate.🌍 Sustainable MaterialOur recycled PLA helps reduce unnecessary plastic waste. PLA (Polylactic Acid) is made from renewable resources such as cornstarch or sugarcane and is compostable under industrial conditions. This means you can store your batteries sustainably without generating excess plastic waste.🎨 Available in Various Colors & Sets!Choose your favorite color or go for a practical set with multiple crates.🔗 Credit to the DesignersThe 3D print files were created by talented artists from the 3D printing community. The original designs were published under a Public Domain license, allowing everyone to use them freely. More details can be found here:Printables – AA/AAA versionPrintables – customizable versionCults3D – original designWe truly appreciate what these designers have created and are excited to offer this fantastic design as a practical product! 🍻🔋

This Snapfit Case is the perfect addition to your BlinkenRocket! It provides a stable base and stylishly showcases the glowing rocket design. Product Details Perfect Fit: Designed specifically for the BlinkenRocket (sold separately). Stable Display: Allows the BlinkenRocket to stand upright – perfect as a decorative display or table light. Sparkling Finish: Made from rPLA Funkelnde Nacht – a black, glittering recycled PLA from the Recyclingfabrik. Simple Design: One-piece snapfit construction, easy to assemble without glue or screws. Open Source: Fully open-source case licensed under CC BY-SA 4.0. Sustainable Material Printed using recycled rPLA from the Recyclingfabrik. This eco-friendly material is made from recycled plastics and gives the case its elegant, starry-night glitter effect. License & Credits The design was created by Axel and released as an open-source project under the CC BY-SA 4.0 license. BlinkenRocket MiniRocket Case © 2025 by Axel is licensed under CC BY-SA 4.0. You can find the original design files here: ➡️ GitLab – BlinkenRocket MiniRocket Case Note The Snapfit Case is sold without the BlinkenRocket kit. The kit is available separately. More Information For additional information and 3D printing instructions, visit our Wiki: ➡️ BlinkenRocket Wiki

Get your coin cells organized! With our CR2032 Battery Holder, you can safely and neatly store up to 36 CR2032 batteries (6x6 arrangement). The stackable design saves space and makes organization easy.🔋 Features:✅ Holds 36 batteries (CR2032, 6x6 arrangement)✅ Stackable design for space-saving storage✅ No assembly required – ready to use immediately✅ Made from sustainable material🌍 Eco-friendly & SustainableThis battery holder is made from recycled PLA – a plant-based plastic that is compostable under industrial conditions. Now you can organize your batteries without generating unnecessary plastic waste.🎨 Available in various colors!Choose from multiple colors and customize your storage to your style.The Story Behind It:In our workshops, we often need a lot of CR2032 batteries, but the typical battery holders always caused chaos. The batteries were not stored neatly, and it was always difficult to find the right ones. That’s why we developed our own battery holder that is space-saving, practical, and most importantly organized. We save time and reduce clutter – and now others can benefit from our solution!Tip: If you want to take your CR2032 battery holder with you, we recommend buying an additional battery holder that you can use as a lid. You can also simply secure the holders together with a rubber band to keep them safe and transport them easily.Perfect for home, workshop, or hobby – this practical & eco-friendly battery holder ensures order and easy access to your coin cells!Please note: The battery holder is sold without batteries. You will need to purchase the batteries separately.

If you're into electronics, DIY tinkering, or just love clever design, the NE555 Fridge Magnet is your perfect match. This legendary timer chip – the NE555 – is brought to life in a 16:1 scale, detailed SMD-style 3D print. It's not just a nod to tech history, but a functional piece of geeky home decor. What makes this magnet special? 🧲 Strong magnetic grip: Powerful neodymium magnets are invisibly embedded into the body – perfect for holding notes, photos, or circuit diagrams on your fridge, toolbox, or whiteboard. ♻️ Sustainably made: Printed using recycled PLA filament – because great design shouldn’t cost the planet. 📏 Bold presence: At 16:1 scale, this SMD chip makes a statement anywhere it’s placed. 🎁 Perfect gift idea: Whether for engineers, makers, hackers, or electronics nerds – this is a thoughtful and funny little gift for any occasion. 🛠️ Lovingly crafted: Each magnet is printed and assembled with attention to detail and built to last. Why the NE555? The NE555 is nothing short of a tech legend. First introduced in 1972, it quickly became one of the most widely used chips in the world. You’ll find it in toys, industrial gear, DIY kits – and even in space-grade versions aboard satellites. Celebrating its 50th birthday in 2022, the NE555 remains a timeless icon in electronics. With this fridge magnet, you honor its legacy – or just show off your favorite chip to the world.Assembly Note: Assembly is super simple: Just insert the silver "legs" into the designated holes of the black NE555 body. If you want to be extra safe, you can secure the legs with a small drop of glue, such as superglue or hot glue. For more information, background details, and assembly tips, check out our Wiki: ➡️ Go to the NE555 Magnet Wiki article

Snapfit Case for the Axolotl Soldering Kit This snapfit case is the perfect addition to the Axolotl Fanclub Badge! It shows off your glowing axolotl in style and spreads the light from its eyes and gills softly and evenly. Product Details Perfect fit: Designed specifically for the Axolotl soldering kit (sold separately). The case consists of three parts: the housing, the power button and the battery cover. Handy on/off button: The button sits on top of the kit's switch, so you can turn your axolotl on and off without taking the board out of the case. Battery change from the back: The twist-off battery cover on the back gives you access to the coin cell so you can swap it while the case stays closed. Optimized light diffusion: Made from recycled, milky translucent PLA, the case spreads the light softly and evenly. The rainbow colors of the eyes and gills look especially vivid. Versatile use: Thanks to the built-in loop, you can wear it as a badge, as a pendant on a chain or as a keychain. 🔧 Quick Guide: Assembling Your Case To make sure everything fits properly, follow this order: Insert the power button: First, place the power button into the empty housing. Insert the axolotl: Place your fully soldered Axolotl kit into the housing so that the switch sits on the button. Press firmly: Push the board into the housing with plenty of force until it is fully seated. Don't worry, it's meant to be this tight so nothing wobbles later! Attach the battery cover: Finally, insert the coin cell and close the case with the battery cover. Sustainable Material The case is printed from eco-friendly recycled PLA. This material is very sturdy and helps reduce plastic waste at the same time. Note The snapfit case is sold without the Axolotl soldering kit. You can add the Axolotl Fanclub Badge separately. The CR2032 coin cell is not included either.