With this all-in-one package you have everything you need for soldering in your hands: The Pinecil soldering iron: The heart of the package, of course. A fine piece of hardware and an absolutely great soldering iron. The silicone USB-C cable: A normal USB-C cable will also work, of course, but this cable is particularly heat-resistant and flexible. The 65W Pine Power charger: The perfect power from the original manufacturer. Real 65W that arrives 100% in the soldering iron. A mini soldering iron holder: Perfect for taking along and placing the soldering iron. Of course also from the original manufacturer. A heat-resistant soldering pad: The silicone pad protects the table and ensures a clean work surface. In addition, there are various small compartments for storing components and accessories. Soldering tin strips: Of course, the soldering tin must not be missing. 0.75mm best Sn100Ni+ on a 1m spool. Every soldering joint is a success!All that's missing now are the right soldering kits. You can find them in the kits menu!As a note: The photo shows a few tools on the silicone pad. These are not included in the delivery. The discount refers to the normal price of the products if you were to buy them individually.Target group This set is perfect for beginners, but you are certainly not buying cheap goods. The quality is really very good and it is wonderful to solder with the soldering iron and the accessories. The easy-to-change tips also make the mini soldering iron flexible to use. However, the price definitely makes it the first soldering iron for a beginner. The Pinecil will definitely be a companion for life.Show us your soldering setupWe at blinkyparts are super curious to know what your soldering setup looks like? Have you printed any other 3D printed parts for the Pinecil? Share your photo with us at Twitter/Mastodon: #SolderConnects Instagram: #SolderConnects or follow us on @blinkyparts_com. Help others with your feedback It's often hard to know which soldering iron is for you. Help others by giving us a rating, a feedback. How did it work? What other equipment did you have? What did you like most about it? What makes the Pinecil special? Just leave a review here on the product page under "Reviews".

We've been looking around the incredibly large solder market and have decided on a good solder for lots of soldering fun: Felder ISO-Core Solder. All lead-free and everything, of course! We have limited ourselves to a small selection, but all the solders here have been tested and found to be good. The diameters are 0.75mm and 1.0mm. In our experience, you don't have to add too much and still don't apply too much solder to your spots. Perfect for fine and coarse solder joints. Properties 2.2% flux Sn100Ni (Sn99,3CUNiGe)0.75mm and 1mm diameter100g spool Made in Germany Felder and Eco Tin Felder is a solder manufacturer from Germany and pays special attention to fair resources with Eco Tin. EcoTin pays attention to environmental protection, prevents child labour and increases work safety. You can read more about the company and EcoTin here: https://www.felder.de/unternehmen/ecotin.html

We've been looking around the incredibly large solder market and have decided on a good solder for lots of soldering fun: Felder ISO-Core Solder. All lead-free and everything, of course! We have limited ourselves to a small selection, but all the solders here have been tested and found to be good. The diameter is 0.75mm. In our experience, you don't have to add too much and still don't apply too much solder to your spots. Perfect for fine and coarse solder joints. Properties 2.2% flux Sn100Ni (Sn99,3CUNiGe)0.75mm diameter1m spool, perfect for testing and first soldering experiences Made in Germany Felder and Eco Tin Felder is a solder manufacturer from Germany and pays special attention to fair resources with Eco Tin. EcoTin pays attention to environmental protection, prevents child labour and increases work safety. You can read more about the company and EcoTin here: https://www.felder.de/unternehmen/ecotin.html

With this heat-resistant silicone soldering pad, you always have a tidy little workspace. Take out the soldering mat and get started with the soldering kits. The soldering pad is blue, 300x200mm in size (about a DIN A4 paper) and has some compartments so that the components don't roll away. After soldering, you simply roll up the mat and stow it away for the next soldering fun! The mat is washable with water and keeps your table clean from solder splashes.As a note: The photo shows a few tools on the silicone mat. These are not included in the delivery.

This portalbe mini soldering iron holder is the perfect companion for your Pinecil. It is the original accessory and offers exactly what you want and nothing more. No wasted space or heavy components. Just lightly moisten the sponge. Portable and of high quality Sponge included Material resists high temperatures Dimensions: 47mm x 40mm x 12mm (WxDxH)Weight: 18g

The perfect addition to your Pinecil: The four-piece soldering tip set from the original manufacturer. 100% compatible. The short tips warm up a little faster and make your Pinecil extra compact.This set contains 4 different tips: ST-I: A round tip with 0.2mm tip radius.Length: 86,1mm Weight: 8,4g ST-C4: A large wedge tip with 45°.Length: 88,2mm Weight: 9,2g ST-D24: A straight wedge tip with no angle.Length: 86,0mm Weight: 8,5g ST-K:  A very large wedge tip with 45°.Length: 91,1mm Weight: 9,2g

The perfect addition to your Pinecil: The four-piece soldering tip set from the original manufacturer. 100% compatible. The short tips heat up a little faster and make your Pinecil extra compact! This set includes 4 different tips: ST-BC2: A fine wedge tip with 45°. Length: 87,2mm Weight: 8,6g ST-C1: A very fine wedge tip with 60°. Length: 88,0mm Weight: 8,4g ST-ILS: A very fine bullet tip with a tip radius of 0.15mm. Length: 88,3mm Weight: 8,6g ST-KU:  A large wedge tip with 45°. Length: 87,8mm Weight: 8,6g

The Pinecil is a smart, portable mini soldering iron with a 32-bit RISC-V SoC, featuring a slim design, automatic standby mode and heating up to operating temperature in just 6 seconds! The v2 is the improved and further enhanced version and successor to version 1. Dual power inputs: The USB-C port supports both PD (Power Delivery) and QC 3.0 (Quick Charge) and a DC5525 barrel DC jack. Fast warm-up: The soldering iron reaches operating temperature in 6 seconds. Support for on-demand rapid boost function. Adjustable soldering tip temperature from 100° C to 400° C, which can be set via the adjustment buttons and an easy-to-read OLED display. Portable: slim design consisting of a SAE 304 stainless steel core in a polycarbonate housing. Automatic standby mode turns on when not in use to ensure user safety. Technical data Power 88W Temperature range 100-400 °C Heating time ~12 s Tip system activ ESD safe yes Automatic standby yes, time and temperature adjustable Display 0,69'' white OLED monochrome display (96x16p) Processor 32-Bit RV32IMAC RISC-V "SiFive E24 Core" @ 144 MHz Memory 192 KB Flash, 132 KB SRAM Power supply USB-C, DC5525 Dimension 155mm with soldering tip / 103mm without x 12.8mm x 16.2mm Weight 28g with soldering tip and 18g without soldering tip Target Group The soldering iron is the perfect tool ranging between consumer and professional use. The manufacturing is of very high quality. The easily exchangeable tips also make the mini soldering iron flexible to use. However, the price clearly makes it the first soldering iron for a beginner. The Pinecil will definitely be a long-lasting companion for life. The scope of delivery The scope of delivery of the Pinecil v2 is limited to the most important things you need. Of course, the soldering iron itself is included. The latest firmware is already flashed on the Pinecil. There is also a short, pointed soldering tip. The short tip gets hot particularly quickly! A power supply unit or USB cable is not included. Take a look at the accessories in our shop. You need at least a power supply and a cable. Compatible power supplies The hollow plug socket is not protected against polarity reversal! You must make sure that you use a compatible power supply unit. You can find a list from the manufacturer here: https://wiki.pine64.org/wiki/Pinecil_Power_Supplies We recommend only USB-C power supplies with 65W and 20V. (Attention: Many power supplies do not have a real 65W on one port and distribute the power e.g. to two sockets). The original power supply from Pinecil is excellent. Also the power station. Recommended cables It should definitely be a USB-C to USB-C cable. Since it is a soldering iron, a silicone cable is also extremely practical. Silicone cables are heat-resistant and will not break if accidentally touched. Check out our accessories, we have suitable USB cables in stock! Other accessouries There are several other accessories for the Pinecil v2: Mini stand Although you can simply place the Pinecil on its soldering pad, because the tip does not overlap at the front, a small stand with a sponge or metal wool is practical for cleaning the tip. Other tips There are many other tip sizes. From tiny pencil tips to wide wedge tips, all tips can be used. By the way: The Pinecil v1 soldering tips are compatible with the Pinecil v2. Open Source and Community The Pinecil is a community project. This means that many developers have worked together to perfect the piece of hardware and the software. The community has made sure that the components are open source. This means that there is no trade secret about how the soldering irons are constructed. You can simply download the instructions and circuit diagrams from the internet. This has the advantage that a possible repair is also made much easier, since it is clear which components have been used. The community also ensures that the soldering iron corresponds exactly to the wishes and needs of the solderers. A really great piece of hardware. The PINECIL's software is also open source, so it is easy to make adjustments. It is quite easy to create your own temperature curves or programme a specific response. Built-in motion sensors allow the soldering iron to quickly switch between stand-by mode and operating temperature. Differences between v1 and v2 The new version v2 brings a number of new features. Among the most important are: Bluetooth: It is now possible, for example, for a fan control to switch on automatically when the iron is in use. A shorter tip: This makes the soldering iron even easier to hold and it gets hot even faster. Improved power supply: The power supply has been improved and stabilised. Show us your soldering setup We at blinkyparts are super curious to know what your soldering setup looks like? Do you have any other 3D printed parts for the Pinecil? Share your photo with us on Twitter/Mastodon: #SolderingConnects Instagram: #LötenVerbindet or follow us under @blinkyparts_com Help others with your feedback It's often hard to know which soldering iron is for you. Help others by giving us a rating, a feedback. How did it work? What other equipment did you have? What did you like most about it? What makes the Pinecil special? Just leave a review here on the product page under "Reviews".

The Pinecil is a smart, portable mini soldering iron with a 32-bit RISC-V SoC, featuring a slim design, automatic standby mode and heating up to operating temperature in just 6 seconds! The v2 is the improved and further enhanced version and successor to version 1. Dual power inputs: The USB-C port supports both PD (Power Delivery) and QC 3.0 (Quick Charge) and a DC5525 barrel DC jack. Fast warm-up: The soldering iron reaches operating temperature in 6 seconds. Support for on-demand rapid boost function. Adjustable soldering tip temperature from 100° C to 400° C, which can be set via the adjustment buttons and an easy-to-read OLED display. Portable: slim design consisting of a SAE 304 stainless steel core in a polycarbonate housing. Automatic standby mode turns on when not in use to ensure user safety. Technical data Power 88W Temperature range 100-400 °C Heating time ~12 s Tip system activ ESD safe yes Automatic standby yes, time and temperature adjustable Display 0,69'' white OLED monochrome display (96x16p) Processor 32-Bit RV32IMAC RISC-V "SiFive E24 Core" @ 144 MHz Memory 192 KB Flash, 132 KB SRAM Power supply USB-C, DC5525 Dimension 155mm with soldering tip / 103mm without x 12.8mm x 16.2mm Weight 28g with soldering tip and 18g without soldering tip Target Group The soldering iron is the perfect tool ranging between consumer and professional use. The manufacturing is of very high quality. The easily exchangeable tips also make the mini soldering iron flexible to use. However, the price clearly makes it the first soldering iron for a beginner. The Pinecil will definitely be a long-lasting companion for life. The scope of delivery The scope of delivery of the Pinecil v2 is limited to the most important things you need. Of course, the soldering iron itself is included. The latest firmware is already flashed on the Pinecil. There is also a short, pointed soldering tip. The short tip gets hot particularly quickly! A power supply unit or USB cable is not included. Take a look at the accessories in our shop. You need at least a power supply and a cable. Compatible power supplies The hollow plug socket is not protected against polarity reversal! You must make sure that you use a compatible power supply unit. You can find a list from the manufacturer here: https://wiki.pine64.org/wiki/Pinecil_Power_Supplies We recommend only USB-C power supplies with 65W and 20V. (Attention: Many power supplies do not have a real 65W on one port and distribute the power e.g. to two sockets). The original power supply from Pinecil is excellent. Also the power station. Recommended cables It should definitely be a USB-C to USB-C cable. Since it is a soldering iron, a silicone cable is also extremely practical. Silicone cables are heat-resistant and will not break if accidentally touched. Check out our accessories, we have suitable USB cables in stock! Other accessouries There are several other accessories for the Pinecil v2: Mini stand Although you can simply place the Pinecil on its soldering pad, because the tip does not overlap at the front, a small stand with a sponge or metal wool is practical for cleaning the tip. Other tips There are many other tip sizes. From tiny pencil tips to wide wedge tips, all tips can be used. By the way: The Pinecil v1 soldering tips are compatible with the Pinecil v2. Open Source and Community The Pinecil is a community project. This means that many developers have worked together to perfect the piece of hardware and the software. The community has made sure that the components are open source. This means that there is no trade secret about how the soldering irons are constructed. You can simply download the instructions and circuit diagrams from the internet. This has the advantage that a possible repair is also made much easier, since it is clear which components have been used. The community also ensures that the soldering iron corresponds exactly to the wishes and needs of the solderers. A really great piece of hardware. The PINECIL's software is also open source, so it is easy to make adjustments. It is quite easy to create your own temperature curves or programme a specific response. Built-in motion sensors allow the soldering iron to quickly switch between stand-by mode and operating temperature. Differences between v1 and v2 The new version v2 brings a number of new features. Among the most important are: Bluetooth: It is now possible, for example, for a fan control to switch on automatically when the iron is in use. A shorter tip: This makes the soldering iron even easier to hold and it gets hot even faster. Improved power supply: The power supply has been improved and stabilised. Show us your soldering setup We at blinkyparts are super curious to know what your soldering setup looks like? Do you have any other 3D printed parts for the Pinecil? Share your photo with us on Twitter/Mastodon: #SolderingConnects Instagram: #LötenVerbindet or follow us under @blinkyparts_com Help others with your feedback It's often hard to know which soldering iron is for you. Help others by giving us a rating, a feedback. How did it work? What other equipment did you have? What did you like most about it? What makes the Pinecil special? Just leave a review here on the product page under "Reviews".

Finally it's here. The perfect power supply for your Pincil, designed and built by the original manufacturer. Until now you couldn't get it and Pine64 has really built a great piece of hardware: This ingenious USB power supply offers everything a hobbyist's heart desires. Both Quick Charge (QC3.0) and twice Power Delivery (PD with 65W).USB-C1 Power Delivery (PD) Port 65W Max PD 5V3A, 9V3A, 12V3A, 15V3A, 20V3.25APPS 3.3-11V 5AUSB-C2 Power Delivery (PD) Port 65W Max PD 5V3A, 9V3A, 12V3A, 15V3A, 20V3.25A PPS 3.3-11V 5AUSB-A Quick Charge QC3.0 Port 18W OutputQC3.0 4.5V5A, 5V4.5A, 9V3A, 12V3A, 20V3AWhen USB-C1 and C2 are connected simultaneously, USB-C1 provides 45W Max (5V3A, 9V3A, 12V3A, 15V3A) and USB-C2: 18W Max (5V3A, 9V2A, 12V1.5A). If the USB-A cable is also connected, USB-C2 and USB-A together provide 18W. If USB-C1 and USB-A are connected at the same time, USB-C1 supplies 45W max (5V3A, 9V3A, 12V3A, 15V3A) and USB-A 18W max (5V3A, 9V2A, 12V1.5A).Open Source and Community The PinePower GaN USB power supply is a community project. This means that many developers have worked together to perfect the piece of hardware and the software. The community has made sure that the components are open source. This means that there is no trade secret about how everything is built. You can simply download the instructions and circuit diagrams from the internet. This has the advantage that a possible repair is also made much easier, as it is clear which components have been used. A really great piece of hardware. Show us your soldering setup We at blinkyparts are super curious to know what your soldering setup looks like? Have you printed any other 3D printed parts for the Pinecil? Share your photo with us at Twitter/Mastodon: #SolderingConnects Instagram: #SolderingConnects or follow us on @blinkyparts_com Help others with your feedbackIt's often hard to know which soldering iron is for you. Help others by giving us a rating, a feedback. How did it work? What other equipment did you have? What did you like most about it? What makes your Pine Powerstation special? Just leave a review here on the product page under "Reviews".

Looking for the perfect case for your Pinecil? Then you've come to the right place. With this chic 3D-printed case you can store your Pinecil and lots of accessories. The box offers space for the soldering iron, the cable, two soldering tips (even the long ones), brass sponge and even a soldering iron holder. That's right: in the picture the part with the ball bearing can simply be used as a soldering iron holder. Just make sure you put the soldering iron in completely. From the outside, the part is absolutely robust and can be closed quickly and securely with two buckles. Translated with www.DeepL.com/Translator (free version)The case comes as a kit. However, you don't need many tools or skills and can assemble it yourself very easily. Note: The case is sold without contents. So without cables, Pinecil and co. (the scope of delivery is described below).Scope of deliveryNote: The case is sold without contents. So without cables, Pinecil and co. The following scope of delivery is included in the kit:Six 3D-printed parts made of PLA (two inner shells, two outer shells and the buckles).One 3D printed part made of ABS for the soldering iron holderOne metal spongeA ball bearingAll the necessary nuts and bolts to assemble the case3D printYou can find the template for the case here: https://www.printables.com/de/model/345083-rugged-multipart-pinecil-caseThe template for the 3D print is from PjotrStrog and originates from Termiman. The wonderful Rugged Boxes von Whity were used. The three of them have given me permission to offer the great case here in the shop for you. Be sure to check out the makers or print out the case or a box yourself. It's worth it!We only use high-quality materials for our 3D printing. The outer case is printed with colourFabb Vertigo Star Night (PLA). The inner parts and closures with colorFabb Dutch Orange (PLA). The soldering iron holder is made of robust and heat-resistant ABS.Tools neededYou don't need much for the assembly. Only a hexagonal spanner. Only 7 screws need to be tightened and the case is ready for your Pinecil.LicenceA word about the licence: The Pinecil Case is published under CC BY-NC-SA 4.0. This actually means that the case cannot be sold here in the shop. However, I have received permission and a special licence from the makers. Please honour the licence if you adapt or improve the case.

The perfect accessory for you and your Pinecil soldering iron: A transparent case for your Pinecil. Show what the Pinecil made of! (phun intended). The case fits the Pinecil v2 and requires two screwdrivers. The case and the matching buttons are supplied. Of course, the necessary screws and a spare contact are also included. You want a different colour? Why not simply paint the case from the inside or outside?

This USB-C to USB-C silicone cable was specially developed for the Pinecil soldering iron. It is flexible, tangle-free, high temperature resistant and has low resistance. This cable mainly for power supply and can be used for PinePhone and Pinebook Pro application. Specifications: Material: silicone shell and copper wire. Colour: Red (indicates that it is a power supply cable). Heat resistance: up to 350°C Length: 1.5 metres