We've been looking around the incredibly large solder market and have decided on a good solder for lots of soldering fun: Felder ISO-Core Solder. All lead-free and everything, of course! We have limited ourselves to a small selection, but all the solders here have been tested and found to be good. The diameter is 0.75mm. In our experience, you don't have to add too much and still don't apply too much solder to your spots. Perfect for fine and coarse solder joints. Properties 2.2% flux Sn100Ni (Sn99,3CUNiGe)0.75mm diameter1m spool, perfect for testing and first soldering experiences Made in Germany Felder and Eco Tin Felder is a solder manufacturer from Germany and pays special attention to fair resources with Eco Tin. EcoTin pays attention to environmental protection, prevents child labour and increases work safety. You can read more about the company and EcoTin here: https://www.felder.de/unternehmen/ecotin.html

Flux Pen 500-6B Product Description The Flux Pen 500-6B allows precise, spot-on application of no-clean flux in confined or hard-to-reach areas. It is ideal for repairs and retrofitting of SMD components on densely populated boards and on ceramic substrates. The pen is safe, fast, easy to use and cost-effective. Technical Specifications No Clean – Flux Halogen-free activated rosin flux 6% solid content Product Features Ideal for repairs and retrofitting of SMD components on densely populated boards and on ceramic substrates Precise, spot-on application User-friendly Easy to use, even in hard-to-reach areas Replaceable tips Safe, fast and cost-effective Application The Stannol Flux Pen 500-6B has a spring mechanism made of stainless material at the tip. Light pressure dispenses a controlled amount of liquid onto the workpiece surface. This precise dispensing mechanism prevents dripping, unnecessary consumption and spillage to other areas of the circuit board. Shelf Life 2 years (when stored correctly, unopened). Health and Safety Read the safety data sheet and observe safety measures before first use. Disclaimer The data given are typical values and do not constitute a specification. This data sheet is for information only. Our application-related advice, whether provided in writing or verbally by us or by our sales representatives, is non-binding – including with regard to any third-party rights – and does not release our customers from their own obligation to verify that our products are suitable for their intended use. STANNOL GmbH & Co. KG Haberstr. 24 · 42551 Velbert, Germany Tel: +49 (0)2051-3120-0 · Fax: +49 (0)2051-3120-111 Email: info@stannol.de · www.stannol.de As of: 22.01.2020 · TDB_HP_Flux_und_Reinigungsstifte_DE

Stannol Solder Wire KRISTALL-611 – Solder Wire from the Kristall-600 Series Our solder wire with silver content (Sn96.5Ag3Cu0.5) combines the benefits of a lead-free alloy with the properties of silver: The addition of silver increases the mechanical strength of the solder joint and improves both electrical and thermal conductivity. This results in reliable, long-lasting connections that are particularly suitable for demanding electronics and fine soldering work. The alloy meets common SAC standards and is suitable for RoHS-compliant applications. The KRISTALL-611 flux system is part of the Kristall-600 series and was developed for manual soldering tasks. Thanks to its properties, the solder wire is also suitable for use in soldering robots. Despite mild activation, it ensures fast and reliable wetting on most surfaces used in modern electronics manufacturing. Oxidised, readily solderable metal surfaces such as copper, brass or tinned surfaces are reliably suited for joint formation. KRISTALL-611 leaves minimal, transparent and electrically safe residues. The wire flux of the Kristall-600 series is colophony-free and based on a synthetic resin matrix. Its high thermal stability makes it particularly suitable for all lead-free alloys. The resin system is designed so that only small amounts of transparent residues with high electrical safety are formed. The Kristall-600 series is available in the Fairtin alloys Flowtin and SN100C. For Fairtin, only tin from manufacturers who observe environmental protection, international standards and social responsibility is used. The micro-alloying constituents in Flowtin and SN100C are gentle on soldering tips and can significantly extend tool life. Product Features KRISTALL-611 Classification according to J-STD-004C (REM1) Greatly reduced spattering Good wetting Transparent, clear residues Electrically safe residues No-Clean – residues may remain on the solder joint The low tendency to spatter, the light residues and the thermal resistance of the flux result in a clean solder appearance. Technical Data KRISTALL-611 Property KRISTALL-611 Flux type (J-STD-004C) REM1 Flux content 2.5 % Halide content <1.1 % Corrosivity (J-STD-004C) PASS / M Surface insulation resistance PASS / >108 Ω ECM test PASS / F50≥I50/10 Available diameters 0.3 / 0.5 / 0.7 / 0.8 / 1.0 mm (standard) Packaging units 500 g, 1 kg Available alloys (among others): Fairtin SN100C, Sn99.3Cu0.7NiGe (403), Sn95Sb5, Flowtin lead-free, Fairtin Flowtin TC Sn99.3Cu0.7, Fairtin Flowtin TSC305 Sn96.5Ag3.0Cu0.5. Other combinations on request. Application Stannol solder wire KRISTALL-611 is suitable for hand and machine soldering in electrical and electronics applications. The flux residues may remain on the solder joints (No-Clean). As a rule of thumb: soldering tip temperature = liquidus of the alloy plus 120–140 K. Example alloy TC Sn99.3Cu0.7 (melting point 227 °C): soldering tip temperature 340–360 °C. The thermal system should be well matched. Cleaning If cleaning is required for optical or technical reasons, the residues can be removed using conventional methods. Stannol recommends the cleaner Flux-Ex Post for this purpose. Health and Safety Read the safety data sheet before first use and observe the safety measures. Soldering produces solder fume – keep it away from the breathing zone. The use of professional extraction and filtration systems is recommended. Stannol is one of the leading manufacturers of solder wire and flux systems. The company supplies quality solders and consumables for crafts, industry and electronics manufacturing – from lead-free solder wire to soldering tip care products.

Stannol Ecoloy Tippy – Cleaning and Tinning in One Step Stannol Ecoloy Tippy combines cleaning and tinning of contaminated and oxidised soldering iron tips in a single operation. In the electronics and electrical industry in particular, tips that work reliably are essential. This block restores the soldering capability of your tips. The product contains lead-free solder powder Sn97Cu3 with activating additives. The tinning alloy is compatible with common solders, including lead-based types. You can use it without difficulty with both leaded and lead-free solder wire. Application Draw the soldering tip across the surface of the block or rotate it lightly on it. Tip temperature should be between 250 °C and 450 °C; higher temperatures improve cleaning and tinning. Important: Do not press the hot tip into the block. Only minimal fumes are produced, even at higher temperatures – impact on room air is negligible. Afterwards wipe the tip with a slightly damp sponge. A thin tin coating is sufficient; you can continue soldering straight away. Note for lead-free soldering: Use only Ecoloy Tippy with the green Ecoloy symbol. Contents and Storage 1 block Stannol Ecoloy Tippy (net 12 g) in metal tin. Unlimited shelf life when stored correctly in the original sealed container. Safety Read the safety data sheet before first use and observe the safety measures specified.Stannol is one of the leading manufacturers of soldering and tinning products. The long-established company supplies quality tools and consumables for craft, industry and hobby use – from solder wire and flux to soldering tip care products.