Looking for the perfect case for your Pinecil? Then you've come to the right place. With this chic 3D-printed case you can store your Pinecil and lots of accessories. The box offers space for the soldering iron, the cable, two soldering tips (even the long ones), brass sponge and even a soldering iron holder. That's right: in the picture the part with the ball bearing can simply be used as a soldering iron holder. Just make sure you put the soldering iron in completely. From the outside, the part is absolutely robust and can be closed quickly and securely with two buckles. Translated with www.DeepL.com/Translator (free version)The case comes as a kit. However, you don't need many tools or skills and can assemble it yourself very easily. Note: The case is sold without contents. So without cables, Pinecil and co. (the scope of delivery is described below).Scope of deliveryNote: The case is sold without contents. So without cables, Pinecil and co. The following scope of delivery is included in the kit:Six 3D-printed parts made of PLA (two inner shells, two outer shells and the buckles).One 3D printed part made of ABS for the soldering iron holderOne metal spongeA ball bearingAll the necessary nuts and bolts to assemble the case3D printYou can find the template for the case here: https://www.printables.com/de/model/345083-rugged-multipart-pinecil-caseThe template for the 3D print is from PjotrStrog and originates from Termiman. The wonderful Rugged Boxes von Whity were used. The three of them have given me permission to offer the great case here in the shop for you. Be sure to check out the makers or print out the case or a box yourself. It's worth it!We only use high-quality materials for our 3D printing. The outer case is printed with colourFabb Vertigo Star Night (PLA). The inner parts and closures with colorFabb Dutch Orange (PLA). The soldering iron holder is made of robust and heat-resistant ABS.Tools neededYou don't need much for the assembly. Only a hexagonal spanner. Only 7 screws need to be tightened and the case is ready for your Pinecil.LicenceA word about the licence: The Pinecil Case is published under CC BY-NC-SA 4.0. This actually means that the case cannot be sold here in the shop. However, I have received permission and a special licence from the makers. Please honour the licence if you adapt or improve the case.

The Space Egg is a fascinating soldering kit that uniquely combines technology and design! This glowing Easter egg features a clever switch mechanism: Simply turning the egg activates a magnetic switch (reed contact), which lights up the three RGB LEDs. The rainbow colors illuminate both the egg and the flame effect under the rocket-shaped egg cup. 🚀 Key Features: ✅ Perfect for beginners – easy soldering kit with few components ✅ Unique mechanism – light control by turning the egg ✅ Glowing RGB LEDs – create a magical color effect ✅ Great Easter gift – creative, educational, and decorative ✅ Sustainably made – from recycled PLA 🛠️ Kit Contents: ✔️ 3x RGB LEDs (5 mm) ✔️ 1x LED spacer ✔️ 1x Egg (two parts) ✔️ 1x Rocket egg cup (3D-printed, optional) ✔️ 1x Flame effect (3D-printed, optional) ✔️ 1x Reed switch (magnetic switch) ✔️ 1x CR2032 battery holder ✔️ 1x CR2032 battery (not included) ✔️ 1x 8x2 mm neodymium magnet ✔️ 1x Space Eggs PCB 🔧 Additional Tools Needed: ✂️ Super glue or hot glue for assembly 🛠️ 5 mm drill bit for precise adjustments 🌍 Eco-Friendly & Sustainable The 3D-printed parts of the Space Egg are made from recycled PLA – a plant-based plastic that is compostable under industrial conditions. Experience technology while minimizing plastic waste! 💡 Tip: The Space Egg is not only a fun DIY project but also a great night light or Easter decoration!You can find more information and the 3D printing files in our Wiki. It also includes a detailed assembly guide and useful tips for building your Space Egg! 🔋 Please note: The CR2032 battery is not included and must be purchased separately.

Keep your batteries organized with the Beer Crate Battery Holder – a unique, stackable mini beer crate for various battery types! This clever and eco-friendly storage solution is 3D-printed from recycled PLA, ensuring your batteries are safely stored and always within reach.✨ Available Variants:✅ AA Version – Holds 12 batteries✅ AAA Version – Holds 20 batteries✅ 9V Version – Holds 5 batteriesScope of deliveryThe choice is yours! You can choose between AAA, AA and 9V block and between different colors:  Black (glitter, sparkling night) Green (Fresh meadow) Purple (Fleeting Violet) Orange (Mild sea buckthorn Or we can choose a color, which is also a little cheaper. You will receive one box each. If you select “Each type once”, you will receive one box each for AAA, AA and 9V batteries, i.e. a total of three boxes.🔄 Stackable & PracticalThanks to its smart design, these crates can be easily stacked, allowing you to store even larger quantities of batteries in an organized way.🛠 Easy AssemblyFor final assembly, simply use a small amount of plastic glue or super glue to securely attach the bottom part to the beer crate.🌍 Sustainable MaterialOur recycled PLA helps reduce unnecessary plastic waste. PLA (Polylactic Acid) is made from renewable resources such as cornstarch or sugarcane and is compostable under industrial conditions. This means you can store your batteries sustainably without generating excess plastic waste.🎨 Available in Various Colors & Sets!Choose your favorite color or go for a practical set with multiple crates.🔗 Credit to the DesignersThe 3D print files were created by talented artists from the 3D printing community. The original designs were published under a Public Domain license, allowing everyone to use them freely. More details can be found here:Printables – AA/AAA versionPrintables – customizable versionCults3D – original designWe truly appreciate what these designers have created and are excited to offer this fantastic design as a practical product! 🍻🔋

Get your coin cells organized! With our CR2032 Battery Holder, you can safely and neatly store up to 32 CR2032 batteries (6x6 arrangement). The stackable design saves space and makes organization easy.🔋 Features:✅ Holds 32 batteries (CR2032, 6x6 arrangement)✅ Stackable design for space-saving storage✅ No assembly required – ready to use immediately✅ Made from sustainable material🌍 Eco-friendly & SustainableThis battery holder is made from recycled PLA – a plant-based plastic that is compostable under industrial conditions. Now you can organize your batteries without generating unnecessary plastic waste.🎨 Available in various colors!Choose from multiple colors and customize your storage to your style.The Story Behind It:In our workshops, we often need a lot of CR2032 batteries, but the typical battery holders always caused chaos. The batteries were not stored neatly, and it was always difficult to find the right ones. That’s why we developed our own battery holder that is space-saving, practical, and most importantly organized. We save time and reduce clutter – and now others can benefit from our solution!Tip: If you want to take your CR2032 battery holder with you, we recommend buying an additional battery holder that you can use as a lid. You can also simply secure the holders together with a rubber band to keep them safe and transport them easily.Perfect for home, workshop, or hobby – this practical & eco-friendly battery holder ensures order and easy access to your coin cells!Please note: The battery holder is sold without batteries. You will need to purchase the batteries separately.

This Snapfit Case is the perfect addition to the Rainbow Unicorn Soldering Kit! It provides a stylish way to display your unicorn while enhancing its glow. Product Details Custom-Fit Enclosure: Designed specifically for the Rainbow Unicorn Soldering Kit (sold separately). Convenient On/Off Button: The two-piece design includes the main case and a button for easy power control of the unicorn. Optimized Light Diffusion: Made from recycled, milky-transparent PLA, ensuring a soft and even light distribution. Versatile Usage: Features a built-in loop, allowing it to be worn as a pendant on a necklace or attached to a keychain. Sustainable Material The case is 3D-printed using eco-friendly, recycled PLA. This material is highly durable and helps reduce plastic waste. Important Note The Snapfit Case is sold without the Rainbow Unicorn Soldering Kit! The kit must be purchased separately. Acknowledgment Stefan Daschek adapted the fantastic design by Christian Erhard, creating this Snapfit variant. You can find the files for 3D printing in our Wiki: https://wiki.blinkyparts.com/de/Bausaetze/Einhorn