A replacement filter made of activated carbon for solder fume extraction Humo

Pinecil v2 – Open Source Soldering Iron with USB-C The Pinecil v2 is a smart, portable soldering iron powered by a RISC-V processor. It combines high performance with open-source freedom, making it ideal for both beginners and professionals. With USB-C PD support up to 65 W, it heats up within seconds and offers precise control via an OLED display. Highlights Power: Up to 88 W (USB-C PD or DC5525 barrel) Fast heat-up (~6–12 seconds) Temperature range: Adjustable from 100–400 °C 0.69" OLED display for easy configuration Automatic standby and sleep modes Bluetooth BLE (v2 only) Open source hardware & software Supports custom firmware (RISC-V development) Compatible with TS100-style tips Lightweight: only 28 g with tip Technical Specifications Processor: 32-bit RV32IMAC RISC-V “SiFive E24 Core” @ 144 MHz Memory: 192 KB Flash, 132 KB SRAM Display: 0.69" OLED (96x16 px, white monochrome) Power Input: USB-C PD (12–20 V), DC5525 (12–24 V) Dimensions: 155 mm (with tip), 103 mm (without tip), Ø 12.8 mm Weight: 28 g (with tip), 18 g (without tip) Included in the box Pinecil v2 soldering iron Short-tip (fast-heating) Preinstalled firmware Note: Power supply and USB-C cable not included – please order separately. Recommended Accessories USB-C to USB-C silicone cable 65W USB-C GaN charger 165W Desktop Power Station Robust carrying case Knurled screw for tool-free tip changes Soldering Tips & More Replacement tip ST-B2 (included) Fine tip set (4 pcs) Large tip set (4 pcs) Micro tip set (ideal for SMD) Threaded tip set for 3D printing Open Source & Community Pinecil is a true community project: fully open source, well documented, and extensible. It’s not only perfect for soldering but also serves as a development platform for RISC-V firmware. BLE Bluetooth support (v2 only) allows advanced features like automatic fan control or wireless monitoring. More info & guides in our wiki: Pinecil Wiki (EN/DE) Official PSU list: Pine64 Power Supply Wiki Show us your soldering setup! Share your project on Instagram or Mastodon using the hashtag #LötenVerbindet or tag us at @blinkyparts_com.

Sturdy Case Kit for the Pinecil – Robust, Well Thought-Out & Perfectly Organized 🆕 Update: Now made from PETG! You spoke, we listened: many of you asked for an even tougher case. That's why we now print it from PETG instead of PLA. The result: noticeably more heat-resistant and more durable, ideal for everyday use at the soldering bench and on the go. Due to the new material, the colors have changed slightly. Check out the updated product photos to see what the case looks like now. Looking for a practical and robust storage solution for your Pinecil soldering iron and accessories? Then this 3D-printed case kit is exactly what you need. Perfect for home, travel or maker events! ✔️ Clever Interior The case holds: 1x Pinecil soldering iron 1x USB-C cable 2x soldering tips (longer variants fit too) 1x brass cleaning sponge 1x integrated soldering iron stand 4x spools for solder or wire Highlight: The soldering iron stand, the solder spools and the sponge cover are held in place by magnets – for extra tidiness and that satisfying snap while you solder. 💪 Printed from PETG PETG is tougher than PLA: it withstands much higher temperatures before deforming and handles impacts and stress better. Your case keeps its shape even when it sits next to a hot soldering iron or travels in your backpack. Outer shell: PETG [color] Inner parts: PETG [color] Soldering iron stand: heat-resistant ABS+ (black) 📦 What's Included (kit without electronics) 2x outer parts ([color], PETG) 2x inner parts ([color], PETG) 1x brass wool + 1x cover 2x clips (latches) 1x ball bearing 1x soldering iron stand (ABS+) 4x spool parts 1x M3x16 screw, 6x M3x20 screws, 1x M3 nut 13x neodymium magnets (various sizes) Note: The kit comes without Pinecil, solder, cable or soldering tips. These are optional and not included. 🔧 Easy Assembly All you need is an Allen key. Thanks to the well thought-out design, assembly takes just a few minutes. Ideal for makers and everyone who wants to become one! 📄 License and Design Sources Based on open-source designs by PjotrStrog, Termiman and Whity (Printables). Used with explicit permission under CC BY-NC-SA 4.0. 🔗 Go to the Wiki Article Of course, we've also put together a wiki article with more information for you: Sturdy Case Kit for the Pinecil – Everything Neat and Perfectly Packed

With this heat-resistant silicone soldering pad, you always have a tidy little workspace. Take out the soldering mat and get started with the soldering kits. The soldering pad is blue, 300x200mm in size (about a DIN A4 paper) and has some compartments so that the components don't roll away. After soldering, you simply roll up the mat and stow it away for the next soldering fun! The mat is washable with water and keeps your table clean from solder splashes.As a note: The photo shows a few tools on the silicone mat. These are not included in the delivery.

This USB-C to USB-C silicone cable was specially developed for the Pinecil soldering iron. It is flexible, tangle-free, high temperature resistant and has low resistance. This cable mainly for power supply and can be used for PinePhone and Pinebook Pro application. Specifications: Material: silicone shell and copper wire. Colour: Red (indicates that it is a power supply cable). Heat resistance: up to 350°C Length: 1.5 metres