Quansheng UV-K5(8) Receiver for 433 MHz Fox Hunting – Modified Version, Transmit Disabled
Product number:
blink23157.1
Product information "Quansheng UV-K5(8) Receiver for 433 MHz Fox Hunting – Modified Version, Transmit Disabled"
Quansheng UV-K5(8) 433 MHz Receiver – Modified for Legal Fox Hunting Use
This special version of the Quansheng UV-K5(8) is specifically modified for use in 433 MHz fox hunting (ARDF). With the custom pre-installed firmware, the transmit function is completely disabled – making it legally usable by non-licensed users in many regions.
All required settings are already preconfigured. Just turn it on and start hunting – no programming, no setup required. Perfect for beginners and seasoned foxhunters alike!
Key Features
- ✅ Custom firmware for 433 MHz fox hunting – transmit function disabled
- ✅ Fully legal for unlicensed users (receive-only)
- ✅ 200 memory channels & direct access to the 433 MHz band
- ✅ Dual-band reception (VHF/UHF), includes FM, Airband, NOAA weather
- ✅ Built-in flashlight, VOX, scrambler, CTCSS/DCS, cross-band features
- ✅ Frequency counter & wireless radio replication
- ✅ Rechargeable via USB-C or desktop charger
Package Contents
- 1 × Quansheng UV-K5(8) handheld unit (modified version, no transmit)
- 1 × 7.2V 1600 mAh Li-Ion battery
- 1 × SMA-Female dual-band antenna
- 1 × Desktop charger (110V–240V)
- 1 × Belt clip
- 1 × Hand strap
- 1 × English manual
Technical Specifications
- Dimensions: 115 x 60 x 37.5 mm
- Weight: 234 g
- Reception Frequencies:
- FM: 50–76 MHz / 76–108 MHz
- AM (Airband): 108–136 MHz
- VHF: 136–174 MHz
- UHF: 400–470 MHz / 470–600 MHz
- Fully supports 433 MHz reception
- Memory Channels: 200
- Battery: 1600 mAh Li-Ion, rechargeable
- NOAA Weather Channels: 10
- Charging: USB-C & desktop cradle
- Extras: flashlight, VOX, frequency counter, scrambler, replication
Recommended Accessories for Fox Hunting
- 🦊 Draussenfuchs – 433 MHz Foxhunt Transmitter DIY Kit
- 📡 Yagi Antenna Kit – Optimized for 433 MHz Fox Hunting
- 🔌 Antenna cable for radio to external antenna
- 🔄 SMA to BNC adapter – ideal for antenna switching
Note: This modified unit is receive-only. Transmitting is permanently disabled and the full functionality of the original radio is not available.
| Build Time: | 1-2 Hours |
|---|---|
| Difficulty: | Medium |
| Manual and iteractive board: | https://binary-kitchen.github.io/SolderingTutorial/ |
| Target group: | Citizens band radio (CB), Radio Operator (HAM) |
Login
Skip product gallery
More for the foxhunt
New
Draussenfuchs – 433 MHz Yagi Antenna Kit for Fox Hunting (ARDF)
€14.99*
433 MHz Yagi Antenna – Lightweight Kit for Fox Hunting & ARDF
The Draussenfuchs Yagi Antenna is a lightweight, DIY antenna kit specifically designed for 433 MHz amateur radio direction finding (ARDF) and fox hunting. It is the ideal companion for our Draussenfuchs 433 MHz transmitter.
Why this antenna?
Optimized for 433 MHz – perfect for ISM and ARDF applications
Lightweight & rollable – can be easily packed away when not in use
Durable & safe – ideal for outdoor use, youth workshops and educational purposes
DIY-friendly – based on simple, widely available hardware store parts
Included or needed parts:
Measuring tape (12.5 mm wide), cut to length
Irrigation tube (6 mm outer diameter)
4-way connectors, heat shrink tubing, M3 threaded rod
Custom Yagi PCB for stable assembly
SMA connector for side-mounted PCB connection
Recommended accessories:
Antenna cable (connects radio ↔ antenna)
Draussenfuchs 433 MHz transmitter kit
Learn more:
Find a detailed build guide and tips in our online Wiki:
👉 ➡️ Go to the Wiki article about the Draussenfuchs Yagi Antenna
Note: This directional antenna is ideal for license-free 433 MHz use and works with any compatible receiver – such as our legal, receive-only handheld unit, perfect for use without a radio license.
New
Draussenfuchs 433 MHz Foxhunt Transmitter – License-Free DIY Kit
€17.99*
Foxhunting for Everyone – with the Draussenfuchs 433 MHz Transmitter
The Draussenfuchs 433 MHz Transmitter is a license-free, beginner-friendly foxhunt transmitter for exciting outdoor radio activities. Ideal for schools, youth groups, hobbyists, and anyone curious about radio direction finding – no license required!
What is Foxhunting?
Foxhunting (also known as ARDF – Amateur Radio Direction Finding) is like a modern scavenger hunt using radio signals. A hidden transmitter ("fox") emits short signals at regular intervals. Participants use directional antennas and receivers to locate the signal source in the field. It's a perfect mix of outdoor fun and radio tech!
Inside the Draussenfuchs Transmitter:
433.92 MHz ISM transmitter (license-free)
ESP32-C3 Super Mini – WiFi/Bluetooth capable for extensions
Emits a 0.2-second beep every 2 seconds (ASK/OOK modulated)
Efficient: runs up to 120 hours on AA batteries
Optional 3D-printed mount and PCB for easy assembly
Perfect for:
STEM workshops, education & schools
Beginners and unlicensed users
Outdoor games & group events
DIY electronics enthusiasts
Complete Foxhunt Setup Available
Want to start immediately? We offer a matching receiver (433 MHz, receive-only – 100% legal without a license) and a compact Yagi directional antenna for signal hunting.
We also provide ready-to-go foxhunt rental kits that include transmitters, receivers, and accessories – perfect for events, schools, or clubs!
More Info & Build Instructions
👉 You’ll find detailed instructions, parts list, and tips in our Wiki:
➡️ Draussenfuchs on the blinkyparts Wiki
Note: The transmitter meets all legal requirements for ISM use (duty cycle & frequency). No amateur radio license required.
New
Coaxial Cable – BNC Male to SMA Male (1 m, 50 Ohm)
€14.99*
Coaxial Cable – BNC Male to SMA Male (1 m, 50 Ohm)
This high-quality RF coaxial cable with BNC male to SMA male connectors is ideal for use in antennas, wireless LAN devices, external Wi-Fi radios, test setups and more.The coaxial cable is in conjunction with the coaxial adapter ideal for connecting the radio to the antenna for fox hunting.
Specifications:
Type: RG316 BNC male to SMA male
Impedance: 50 Ohms
Cable Length: 1 meter
Contacts: Gold-plated
Package Includes:
1 × RG316 Coaxial Cable – BNC male to SMA male
This flexible and durable cable ensures precise signal transmission, even at high frequencies. A must-have for your RF, antenna, or measurement setup!
New
Coaxial Adapter – BNC Female to SMA Female - 2-pack
€5.99*
Coaxial Adapter – BNC Female to SMA Female (50 Ohm)
This high-quality RF coaxial adapter converts a SMA male connector to a BNC male connector. Perfect for use in antenna systems, RF radios, CCTV setups, and testing equipment.The coaxial adapter in conjunction with the coaxial cable is ideal for connecting the radio to the antenna for fox hunting.
Specifications:
Type: SMA female to BNC female
Style: Straight
Impedance: 50 Ohms
Length: 21 mm / 0.83 in
Package Includes:
2 × RF Adapter – SMA female to BNC female
A compact and reliable adapter to easily switch between different RF interfaces. Durable and easy to use for all your coaxial needs.