Ebyte radio module NRF24L01 E01-ML01DP5 2.4 GHz incl. matching 3dBi antenna

€10.59*

Available, delivery time: 1-3 days

Tax rate**
Product number: blink238942.1
Product information "Ebyte radio module NRF24L01 E01-ML01DP5 2.4 GHz incl. matching 3dBi antenna"
E01-ML01DP5 is a DIP module based on the original imported nRF24L01P from Nordic in Norway, operating at 2.4Ghz with 100mW transmit power. The E01-ML01DP5's RF performance and component selection during research and development meet industry standards. A high-precision 16MHz industrial-grade crystal oscillator is used and has received FCC, CE and RoHS certification. A power amplifier (PA) and low noise amplifier (LNA) are built in so that the maximum transmit power reaches 100mW and the receive sensitivity is further improved. The products have been significantly improved when there is no PA and LNA in the design.

We supply the module with matching 2.4GHz 3dBi omnidirectional antenna.

Attention: This is only the radio module and intended for hobbyists. The radio module is suitable for openDTU and ahoyDTU (please pay attention to the matching inverters!). The radio module is not sufficient to build an openDTU! You need the complete kit or additional components.

Technical data

  • The tested communication distance is up to 2.5KM
  • Maximum transmit power of 100mW, multi-level adjustable via software
  • Supports data transmission rates of 2Mbps, 1Mbps, 250kbps
  • 125 communication channels to meet the requirements of multipoint communication, grouping, frequency hopping, etc.
  • Connects to the MCU via the SPI interface at a rate of 0 to 10Mbps.
  • Support 2.0V~3.6V power supply, power supply above 3.3V can guarantee the best performance.
  • Industrial standard design, support -40~85°C for long time operati
  • on. SMA interface for easy connection of coaxial cables or external antennas
  • Improved ShockBurst, fully compatible with all NORDIC nRF24L, nRF24E, nRF24U serie

Scope of delivery

  • Ebyte NRF24L01 E01-ML01DP5 Moudl
  • Omnidirectional Antenna
** When selecting the tax rate for products for photovoltaic systems, §8 of our Terms & Conditions must be taken into account.
Target group: Grownup, Nerd

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Weitere Blinke-Bausätze

LED Cube - A colorful LED 3D cube with 27 colorful glowing LEDs
This kit consists of 27 LEDs a simple circuit and a nice wooden box to hide the battery. First you solder a simple LED 3D cube with 3x3x3 LEDs. The total of 27 LEDs shine in bright colors. The box with a power switch and a battery holder for AA looks very good on the desk.No programming knowledge is needed, just a little soldering skill. After that, the LEDs shine independently in all colors of the rainbow.

€11.49*
Nibble Peg - Very simple kit with 4 LEDs
A very simple soldering kit with four LEDs. The four LEDs are connected with a few wires to a battery holder. As soon as a battery is inserted, the LEDs light up in all colors of the rainbow. Thanks to the clothespin, you can easily attach the artwork afterwards. No big soldering skills are needed for this kit. It is really ideal even for children and teenagers.The name comes from the unit "Nibble". A nibble is a unit for four bits (half a byte).

€2.99*
Kitchenkopf with SMD - A medium hard kit with SMD to hang around your neck
The Kitchenhead kit is ideal for learning SMD soldering. The Kitchenkopf kit has 21 SMD LEDs on the board that light up in different animations and display the logo of the Hackspace Binary Kitchen e.V..The animation is made possible with a microcontroller, which is already pre-programmed with the kit.With this SMD kit, first steps with SMD soldering can be made. SMD components of the size 0805 are used. In the SMD world this is relatively large. Because of the size and the components used you will have longer fun with the kit and can thus learn new skills of SMD soldering.

€6.99*
Dice with logic circuits - A medium dice kit ideal for beginners and experienced students
This kit is a simple dice to play with.The 7 LEDs a randomized number between 1 and 6 after pressing the button. The randomness is made possible by a great analog circuit.The kit is ideal for beginners and advanced players, because no programming is necessary and many different components must be installed. Through a more extensive kit, many soldering skills can be learned playfully.

€9.99*