Creative Electronics DIY Kit – No Soldering, With Instructions
Product number:
blink23131
Product information "Creative Electronics DIY Kit – No Soldering, With Instructions"
Contents of the kit
With this kit, you can build three creative experiments from
paper, simple electronics and conductive adhesive tape. The twist:
You don't need a soldering iron or other tools (a hot glue gun is
helpful for one of the projects, but you can do without it).
Instructions:
You can already watch an instruction video for each project.
However, when you purchase the kit, you will receive separate
access to detailed instructions. Click here for the instruction
videos:
- Pixel Art Cube: https://www.voltpaperscissors.com/pixelcubes
- Spin Art Robot: https://www.voltpaperscissors.com/spinartrobot
- RGB Touch Cube: https://www.voltpaperscissors.com/rgb-touchcube
In addition to the 3 projects, there is also a simple circuit
template for experimenting. Each kit also comes with some
additional conductive adhesive tape. You can use this to invent
your own projects.
Important:
The templates and instructions are currently only available in
English. However, all the steps are shown so well in the videos
that you should be able to manage without any knowledge of
English.
The button cells (CR2032) are not included in the kit. These
must be purchased separately (available in supermarkets or
online). We recommend 6 button cells, but you can also manage with
2 button cells if you reuse them.
Warning: Button cells are a choking hazard for small children.
Who is the kit for?
The kit is suitable for children aged 7 and over under adult
supervision.
About Michael from Volt, Paper, Scissors!
Michael is a maker and game designer with a passion for making
electronics more accessible to children. He shares his ideas with
teachers and parents to inspire creativity in their children on
his website Volt,
Paper, Scissors!
| Build Time: | 20-40 Minutes |
|---|---|
| Difficulty: | Easy |
| Needed batteries (not inclueded): | CR2032 coin cell / LIR2032 rechargeable coin cell |
| Target group: | Children, Grownup, Nerd |
Login
Skip product gallery
Weitere Blinke-Bausätze
LED Cube - A colorful LED 3D cube with 27 colorful glowing LEDs
€11.49*
This kit consists of 27 LEDs a simple circuit and a nice wooden box to hide the battery. First you solder a simple LED 3D cube with 3x3x3 LEDs. The total of 27 LEDs shine in bright colors. The box with a power switch and a battery holder for AA looks very good on the desk.No programming knowledge is needed, just a little soldering skill. After that, the LEDs shine independently in all colors of the rainbow.
Nibble Peg - Very simple kit with 4 LEDs
€2.99*
A very simple soldering kit with four LEDs. The four LEDs are connected with a few wires to a battery holder. As soon as a battery is inserted, the LEDs light up in all colors of the rainbow. Thanks to the clothespin, you can easily attach the artwork afterwards. No big soldering skills are needed for this kit. It is really ideal even for children and teenagers.The name comes from the unit "Nibble". A nibble is a unit for four bits (half a byte).
Dice with logic circuits - A medium dice kit ideal for beginners and experienced students
€9.99*
This kit is a simple dice to play with.The 7 LEDs a randomized number between 1 and 6 after pressing the button. The randomness is made possible by a great analog circuit.The kit is ideal for beginners and advanced players, because no programming is necessary and many different components must be installed. Through a more extensive kit, many soldering skills can be learned playfully.